Thermal Insulation Fasteners Self Stick Pin Nails In Duct Wrap

Insulation Self Stick Pin Nails Introuduce:

Self Sticking Insul Hangers are used to fasten insulation material to walls and ceilings. Self Sticking

Insul Hangers have a steel base which is backed with a ready to use "Peel & Stick" foam adhesive

for quick and easy install onto sheet metal. The base is attached with a sharp pin which pierces the

insulation. A Self Locking Washer is then placed onto the pin to securely hold the insulation in place.

The excess pin length can then be trimmed with Channellock end cutters.

*Self Sticking Insulation Hangers work best on new/clean sheet metal. Perforated Pins should be

used on older/painted ducts, or metal building roofs.

*Max Temperature rating for the self sticking adhesive is 120°F.

Insulation Self Stick Pin Nails Spefication:

Insulation Self Stick Pin Nails Spefication:

Install of Insulation Self Stick Pin Nails:

Recommended assembly method for insulation self stick pin nails  :
1. Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2. Remove the protective release paper taking care not to touch the adhesive.
3. Place the hanger in the required position and press the base against the surface to be insulated
4. Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength
of adherence is achieved after 24 hours.

Usage:
Exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in
soundproofing works,and for the duct-lining.

Package Of Galvanized steel Self-adhesive Stick Pins :