Hvac System Self Adhesive Insulation Pins, Duct Insulation Stick Pins And Washer
Hvac System insulation pins and washer , Duct insulation stick pins and washers
Duct Insulation Stick Pins And Washer Material:
-
Galvanized Steel (Standard)
-
Available in Stainless Steel & Alum as special order
performance tape of Duct Insulation Stick Pins And Washer
- Polyethylene foam with aggresive pressure sensitive rubber resin adhesive.
- Service Temperature : -40 deg C to +70 Deg C
- Highly Resistant to abrasion, corrosion and moisture.
- Confirms to European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
- 10 Minutes 180 degree Peel Adhesion : 30 N/25mm
- 500 Hour static shear ( Stainless Steel) : 0.8 kg/cm3
Self-Adhesive insulation pins and washers/ insulation stick pins specification
| pin diameter | base plate size | insulation pin length |
| 12ga ( 0.106 " ) | 2 " square | 1 " |
| 12ga ( 0.106 " ) | 2 " square | 1 - 5 / 8" |
| 12ga ( 0.106 " ) | 2 " square | 2 " |
| 12ga ( 0.106 " ) | 2 " square | 2 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 3 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 4 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 5 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 6 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 8 " |
| 12ga ( 0.106 " ) | 2 " square | 8 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 9 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 10 - 1 / 2" |
| 12ga ( 0.106 " ) | 2 " square | 12 " |
Duct insulation stick pins application
Insulation Stick pins is fixed on the position where there is significant wind-suction-force or if the height is more than 20m or
if the finishing coat is tile etc.used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in
soundproofing works, and for the duct-lining
1: clean the surface
2:Peel off backing
3: stick pin in place
4: pressure the pin
5: wait 15-20 minutes
6: Install insulation and secure with self locking washer
Duct Insulation Stick Pins And Washer image
Package Of insulation pins and washers/insulation stick pins
1. insulation pin length less than 65mm, 1000pcs per carton, 64 cartons per pallets.
2. insulation pins length 70mm-120mm, 500pcs per cartons,64 cartons per pallets.
3. insulation pins length 125mm-250mm, 250 pcs per cartons, 64 cartons per pallets.
4. as your requirement
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.