Galvaznied Steel Self Adhesive Insulation Hangers Pins For Fixing Rock Wool Layer
| Attribute | Value |
|---|---|
| Product name | Self Adhesive Insulation Hangers |
| Material | aluminum, mild steel, galvanized steel |
| Pin diameter | 12 ga |
| Length | 25mm-180mm |
| Base thickness | 0.4-0.8mm |
| Base size | 2" x 2" |
| Accessories | self locking washer, dome cap washer |
| Sample | support |
Self-Adhering Hangers are designed to attach insulation to clean, dry, smooth, non-porous surfaces. After the hanger is installed, the insulation is impaled over the spindle & secured with a self-locking washer. Due to the nature of adhesives, it is important that the user read & follow the guidelines. It is the responsibility of the user to determine the suitability of the intended application.
Material: Galvanized Steel (Standard) Available in Stainless Steel & Aluminum as special order.
Other details: Standard Lengths are listed above. Other lengths available as Special Order.
Packaging: 1,000 pcs/ctn up to 2-1/2", 500 pcs/ctn up to 8". Hangers are available packed with, or without washers. 100 pc packaging also available. Other diameters available as Special Order. A complete line of Self-Locking Washers in various styles and materials is available for use with Self-Adhering Insul-Hangers.
| Pin Diameter | Tape Base | Pin Length |
|---|---|---|
| 12 ga (.106)/ 3mm | 50mm Square | 1" |
| 12 ga (.106)/ 3mm | 50mm Square | 1-5/8" |
| 12 ga (.106)/ 3mm | 50mm Square | 2-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 3-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 4-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 5-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 6-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 8" |
| 12 ga (.106)/ 3mm | 50mm Square | 8-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 9-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 10-1/2" |
| 12 ga (.106)/ 3mm | 50mm Square | 12" |
- Suitable for all kinds of wall
- High pull-off strength for a higher security of the system
- Low thermal conduction addition value to avoid thermal bridge
- Galvanized layer on the steel nail to protect the nail from alkali
Application: It is fixed on the position where there is significant wind-suction-force or if the height is more than 20m or if the finishing coat is tile etc.
Installation Steps:
- WIPE SURFACE CLEAN. Anchor should be applied to a clean, dry non-porous surface
- PEEL OFF RELEASE BACKING. NOTE: Double faced foam tape has a one-year active shelf life
- STICK ANCHOR IN PLACE. Select location before contact with surface. Press firmly
- APPLY FIRM PRESSURE. 20 pounds of pressure should be applied all around the base of the anchor
- ALLOW TO STAND 15-20 MINUTES. This will permit better adhesion to take place
- INSTALL INSULATION AND SECURE WITH WASHER. Recommended load is 3 lbs. per anchor (.75 lbs./sq. inch maximum)
Self adhesive hanger and SELF-STICK ANCHORS from huihao company.
500 or 1000 units per carton or plastic bag.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.