5" Depth Round Hole Metal Grtp Strut Grating Panel For Anti Skid Stair Treads

>>> Introduction of the Round Hole Metal Grtp Strut Grating

•  Materials:Galvanized Steel, Mild Steel, Aluminum, Stainless Steel
•  common  Width: 24",30"
•  common Channel height: 5"
•  Hole shape:round
•  common Holes number: 13 and16.

                                                Round Hole Metal Grtp Strut Grating specification 

Hole distribution map and reference data of  Round Hole Metal Grtp Strut Grating Panel

>>> Application Of Round Hole Metal Grtp Strut Grating

Because the grating has high anti-slip and resists rust and corrosion features, it is widely used at the rooftop of the train,

industry flooring, platform of the traffic and offshore drilling, etc.

Advantages of the Round Hole Metal Grtp Strut Grating

1.The circular openings (38% of surface area depending on product size) are small enough to catch most falling tools and

other dangerous objects and the self-cleaning open design permits quick drainage.

2.Sturdy construction provides the advantages of heavy load-carrying capacity with minimal deflection; rugged durability with

longer-lasting performance.

3.Light, easy-to-handle planks make installation simple and quick. Most sections are rapidly bolted, clamped or welded into

place.

4.Economical - In addition to low material cost and nominal erection cost, Perf-O Grip™ Grating also features long-lasting

rust-resistant materials and finishes.

5.A variety of standard widths and channel heights are available as well as numerous non-standard shapes and sizes to meet

almost any requirement.

installation of the Round Hole Metal Grtp Strut Grating

Bolt Seats securely anchor the grating to structural supports. The standard bolt seat features oblong holes specifically

designed to ensure a vertical anchor (with a 3/8" bolt) even if the hole is off concentrically by as much as 1/4". Available

in mill-galvanized steel, aluminum and stainless steel.
J-Clips fasten the grating securely to the supporting steel without drilling holes. Standard finish is galvanized.

Mid support clips can be used at midspan to increase load carrying capacities of individual channels by fastening several

planks together to form an integral section. The Midsupport Clip is manufactured from galvanized steel and includes two bolts.