Customized Musical Instrument Ultrasonic Cleaner 40khz without Damage

Cleans in only 2 to 4 minutes using water based detergents.

Cleaning prior to lacquering

1. Ultrasonic clean 130° F, 2 to 3 minutes, 38 to 40 kHz sweep, 300 Hz sweep rate
   Chemistry, Brulin 815GD, 12 ounces per gallon of water
2. Spray rinse with de-ionized* water to remove gross detergent
3. Immersion rinse in flowing warm de-ionized* water (30 seconds)
4. Spray rinse with de-ionized* water (final rinse)
5. Blow dry with clean compressed air or dry nitrogen

Cleaning to remove calcium buildup (replaces "chem-clean")

1. Ultrasonic clean <110° F, 2 to 3 minutes, 38 to 40 kHz sweep, 300 Hz sweep rate
   Chemistry, Ultra-power 132, 1 to 1½ ounces per gallon of water
2. Spray rinse with de-ionized* water to remove gross detergent
3. Immersion rinse in flowing warm de-ionized* water (30 seconds)
4. Spray rinse with de-ionized* water (final rinse)
5. Blow dry with clean compressed air or dry nitrogen
   (minimum process use only steps 1 and 2)

*De-ionized water is best for spot free results. Clean tap water can be substituted if you have good quality water.

Specifications:

Packing and Shipping:

WARRANTY INFORMATION:

1. All the products have been checked and packed in good condition before dispatch.

2. All the products with one year warranty.

3. Most of our products are in stock for fast delivery.

4. We provide application notes and articles on every aspect of ultrasonic cleaning technology.

5. We facilitate prompt service and repair on all models.

6. Our core commitment is to provide exceptional customer service and make sure you get the right Ultrasonic Cleaner for your job.

FAQ:

Q: Can ultrasonic cleaning damage parts?

A: Ultrasonic can't damage parts.

Ultrasonic cleaning is considered safe for most parts, although in some cases it is necessary to observe caution. Although the effects of thousands of implosions per second is very powerful, the cleaning process is safe.

Q.: What are the advantages of ultrasound over traditional cleaning methods?

A.: Compared with traditional methods of ultrasonic cleaning allows you to:

· minimize the use of manual labor

· make cleaning and degreasing without the use of organic solvents

· clean hard to reach areas of products and remove all types of dirt

· shorten the processes such as extraction, dispersion, purification, chemical reactions

· eliminates costly mechanical and chemical cleaning of heat exchangers

Q: What is the duration of time cleaning?
A.: Cleaning time will vary, depending on factors such as soil, solution, the degree of cleanliness

Cleaning effect: