30L Brass Parts Soft Parts Ultrasonic Cleaner with SUS Basket and Lid
30L Brass Parts Soft Parts Ultrasonic Cleaner with SUS Basket and Lid
Benefits of cleaning brass with a sonic cleaner
- The process reaches parts of the brass that are extremely difficult to clean with traditional cleaning methods.
- Every crevice gets completely clean
- No need to disassemble parts
- Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
- Your brass parts will look like new.
How brass is cleaned with a sonic cleaner
- Sonic cleaners come with beakers that sit inside the basin part of the unit. Multiple beakers may be filled at once to enable cleaning many pieces simultaneously. Note that there is no difference when using one beaker compared to multiple as it relates to overall cleaning quality. Make use of the space you have in the sonic cleaner to save on cleaning time by using multiple beakers.
- The cleaning solution mix should follow manufacturer recommendations for brass items. Fill beakers roughly halfway to the top and then place the brass parts inside, ensuring that they are completely submerged.
- Use your sonic cleaner’s recommended cleaning cycle – often 480 seconds or 8 minutes per cleaning cycle. For optimal cleaning, you may need to run up to three cycles. After the cycles have completed the cleaning solution should be carefully drained, leaving the brass in the beakers.
- Next, remove the brass from the beaker and carefully rinse it to remove any residue.
- Return brass to the beaker and add distilled water and baking soda.
- Run the cleaning cycle once again. After the cleaning cycle has ended carefully drain the water and rinse the brass with fresh distilled water.
- Lastly, before drying there is usually a two rinse cycle to finish cleaning. First return the brass items to the beaker and fill the beakers with distilled hot water until they are covered. Set the cleaner to a single cycle. After completion, carefully drain the water. For the second cycle, cover the brass items with distilled room temperature water. Run a final cycle before draining the water again.
- Carefully dry the brass with a soft cleaning cloth and return the pieces to storage
Product specifications:
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) | |
| TA-50 | 150x135x100 | 175x160x210 | 2 | 50 | 60 | 40 | 150 | 1-30 | 0-80 |
| TA-100 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 150 | |||
| TA-150A | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 | |||
| TA-150B | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 | |||
| TA-200 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 | |||
| TA-300 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 | |||
| TA-400 | 500x300x150 | 530x325x285 | 22 | 400 | 480 | 600 | |||
| TA-500 | 500x300x200 | 530x325x325 | 30 | 500 | 600 |
600 |
Our services:
If any technical problem during warranty time, replacement parts will be sent free of charge.
Technical support is also available in whole time.
2. Our Advantage
1. Reply your enquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. OEM is available if the quantity is large.
4. We offer very competitive for all our products.
3. After-sales
Our machines undergo an extensive and strict testing and quality control procedure, ensuring every item purchased meet global quality standards. It's safe and reliable quality for ultrasonic cleaning equipment.
FAQ:
01: why clean brass parts with ultrasonic?
Delivering and using clean parts is not always obvious, certainly, no one wants to handle a dirty parts or install it into a critical machine, but, dirty, debris and contaminants can cause problems for manufactures and end users, from the merely frustrating to catastrophic, dirty parts can cause critical components to exceed tolerances and even fail damaging valuable equipment and property while contamination (everything from grease, oil and chemicals to viruses and bacteria) can seriously harm users.
02: Introduction
Ultrasonic cleaning is a technology that uses high frequency sound waves (ultrasonic: above the range of human hearing) to agitate an aqueous or organic medium (cleaning chemistry) that in turn acts on contaminations adhering to substrates like metals, plastics, glass, rubber and ceramics. Contaminants can be dust, dirty, oil, pigments, grease, polishing compounds, flux agents, fingerprints, soot wax and mold release agents, biological soil like blood, and so on
03: Application
Ultrasonic cleaning can be used for many applications, including plastic parts, bearing, bolts, rubber parts, internal parts, plastic injection molds, transmission parts, and final cleaning of all engine parts prior to assembly, the versatility of ultrasonic cleaning machine make them the perfect choice for automotive, medical, pharmaceutical, aerospace, engineering and many other industries
04: Characters
Opposing horizontal transducers mounted at two sides
Digital control wave ultrasonic generators
Movable cleaning basket
Can combined with lifting system, drying tank, rinsing tank, recirculation & filtering system
Incredible versatility in dimension, function and auxiliary couples
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.