Outer Diameter 94mm 3.5'' SRC3.5 RC Hammer For Sampling
Outer Diameter 94mm Black Color 3.5'' RC Drill Hammer SRC3.5 For Sampling
Product Introduce:
Reverse circulation is achieved by blowing air down the annulus of the rod, the differential pressure creating air lift of the water and cuttings up the inner tube which is inside each rod. It reaches the deflector box at the top of the drill string then moves through a sample hose which is attached to the top of the cyclone.
SOLLROC RC hammer model SRC3.5:
|
Overall Length (less bit) |
1195mm |
|
Weight (less bit) |
44kg |
|
External Diameter |
94mm |
|
Fit bit shank |
SRC3.5 |
|
Hole range |
95-115mm (3 3/4''-4 1/2'') |
|
Top sub thread |
3" Remet / 3.5'' Remet |
|
Working presure |
15-35 bar |
|
Impact rate at 2.4 Mpa |
40Hz |
Bit SRC3.5 specification:Data reference by drop center face bit
| Diameter | No.*Button Dia(mm) | Recommended Shroud dia(mm) | Approx Weight (kg) | |||
| mm | inch | Gauge button | Center button | Center | ||
| 95 | 3 3/4'' | 6*14mm | 4*12mm | 2*12mm | 93 | 6.3 |
| 100 | 3 15/16'' | 6*14mm | 4*12mm | 2*12mm | 98 | 6.5 |
| 104 | 4 3/32'' | 6*14mm | 4*13mm | 2*13mm | 102 | 6.7 |
| 108 | 4 1/4'' | 6*14mm | 4*13mm | 2*13mm | 106 | 6.9 |
| 115 | 4 1/2'' | 6*14mm | 6*13mm | 2*13mm | 113 | 7.1 |
Adavantages:
Detailed Photo:
About us:
SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.
Delivery Way:
By Air, By express or By Sea
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.