Ice Tea Juice Filling Machine / Juice Production Line With Plastic Bottles 380V 50Hz
Ice Tea Juice Filling Machine / Juice Production Line With Plastic Bottles 380V 50Hz
Video show
https://www.youtube.com/watch?v=fh8grv8RlNw&feature=share
General Information
1. This Juice Filling Machine is for PET/Plastic Bottle.
2. It's a hot filling machine
3. Its Capacity is 14000BPH for 500ML Bottle. (BPH - Bottles Per Hour)
4. This Juice Filling Machine can be used for juice,tea,energy drink and other hot filling liquid beverage
Features of juice bottle rinsing filling capping 3-in-1 unit machine
1. The juice filling line processing capacity is 14000 bottles per hour
2. The juice production line Can deal with similar characteristic of fruits
3. Using the high efficient of destoner to improve the mango output percentage effectively
4. Using efficient belt juice extractor to improve the juice efficiency and the output percentage
5. The production process fully automatic PLC control to save labor and Facilitate production management
6. Low-temperature vacuum evaporation, maximize reserve the flavor substances and nutrients also save energy
7. Tubular UHT sterilizer and Aseptic filling machine, produce high-quality aseptic juice products
8. Automatic CIP cleaning, ensure the entire juice filling line equipment of food hygiene and safety requirements
Technique parameters
| Model | RCGF32-32-10 |
| Productivity | 14000BPH |
| Rinsing Head | 32 |
| Filling Head | 32 |
| Capping Head | 10 |
| Bottle Volume | 350ml~2000ml±10ml |
| Bottle Diameter | φ50-92mm |
| Bottle Height | 150-310 mm |
| Filling Tolerance | ±2% |
| Cap Size | 28mm and 30mm PE Standard Caps |
| Air Pressure | 0.6MPa |
| Air Consumption | 500 L/min |
| Filling Water Consumption | 1.5 m3/h |
| Rinsing Water Consumption | 0.5 m3/h |
| Motor Power | 9.18kW |
| Voltage | 380V |
| Dimension(L*W*H) |
3600*2800*3150mm |
| Weight | 5000kg |
| Filling Principle | Gravity Filling |
2). The juice will be prepared by the juice preparation system, the prepared juice is stored in the insulation tank (for heat preservation) temporarily;
3). Automatic heat resistance PET bottle blow molding machine is connected with the water filling machine by the Air conveyor;
4). Prepared juice will be pumped into the juice filling machine; At the same time, empty bottles pass through the rinsing, filling and capping 3-in-1 monoblock, the bottles will be rinsed, filled and capped.
5). Bottled water goes out from the water filling machine and will be transferred to the bottle over-turn sterilizing machine, the cap and the bottle mouth will be sterilized after passing through the sterilizing machine, then the bottles will be transferred to the bottle cooling machine;
6). The bottles are getting dried after passing through the blowing dryer, and the dried bottle will go to the labeling machine and PE film shrink wrapping machine;
7). The packed bottle water will come out from the PE film shrink wrapping machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.