OBD2 OBDII Male to Dual Hyundai and Kia OBD2 Female Round Y Cable
OBD2 OBDII Male to Dual Hyundai and Kia OBD2 Female Round Y Cable
Specification
| OBD2 male plug | standard |
| Pins of OBD2 male plug | copper, nickel-plated or gold-plated |
| Overmold of OBD2 male plug | right angle 90-degree |
| Hyundai and Kia OBD2 female connector | equivalent of the original |
| Terminals of OBD2 female connectors | KET brand, copper, nickel-plated or gold-plated |
| Cable shape | round |
| Wire | 26AWG, pure copper |
| Material of OBD2 male and female connectors | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and miss-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
This is a Y cable with 3 ends of an OBD2 male plug and 2 replacement Hyundai and Kia OBD2 female connectors.
The enclosure of the OBD2 OBDII male plug is assembled. There are 2 pcs of top and bottom plastic enclosures and these 2 pcs of plastic enclosures are assembled together after the wires are soldered to the pins.
Pin assignment or pin out
The pin assignment or pin out is like this:
| OBD2 male plug | Hyundai and Kia OBD2 female connectors |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
| 6 | 6 |
| 7 | 7 |
| 8 | 8 |
| 9 | 9 |
| 10 | 10 |
| 11 | 11 |
| 12 | 12 |
| 13 | 13 |
| 14 | 14 |
| 15 | 15 |
| 16 | 16 |
All 16 pins of the OBD2 OBD male and female connectors are wired, so there are 16 wires of 26AWG in both cables.
The pin assignment or pin out can also be customized according to your needs. If there is no need for more pins to be connected, we suggest we just connect the necessary pins you need and the price can be lower because the raw material and labor cost is lower.
Application
This Y cable is used to connect telematics, IoV devices, fleet management devices, OBD2 GPS trackers, OBD2 CAN programming tools, ECU tuning tools or car performance tuning tools to vehicles' 16-Pin OBD2 female diagnostic ports.
This cable can also be used to connect OBD2 diagnostic devices or scanners or fault code readers (with the appropriate software).
Sending an inquiry
If you haven’t found or don’t have time to look for the OBD2 OBDII, J1939 or J1708 cables, adapters or connectors in our website, feel free to let us know what OBD2 OBDII, J1939 or J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any OBD2 OBDII, J1939 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.