Groove Type Industrial Automation Sensors 25mm Detection Distance E3Z G61

Omron Industrial Automation Sensors E3Z-G61 or E3ZG61

E3Z-G61
 

Product Introduction

Detection distance: 25mm
Light source: infrared light emitting diode (luminescence wavelength: 940 nm)
Connection mode: lead type (length of wire: 2m)
Shape: groove type
Standard testing object: opacity more than 1.5mm
Power supply voltage: DC12 ~ 24V + 10% (ripple (P-P) 10%)
Consumption of current: below 25mA
Control output: NPN collector open path below DC26.4V
Load current: below 100mA
Residual voltage: (DC) below 1V
Action mode: ON switching mode when ON/ shading in light
Protection circuit: output short circuit protection, power supply back protection, prevention of mutual interference
Response time: Below 1ms (action / reset)
Use environmental illumination: incandescent lamp: below 3000lx, sun light: below 10000lx
Use of ambient temperature: -25 ~ 55 C (no ice, dew)
Preservation of ambient temperature: -40 ~ 70 C (no ice, dew)
Ambient humidity range: 35 to 85% when used
Preservation: 35 ~ 95% (no ice, dew)
Insulation resistance: above 20M omega (DC500V megabymeter)
Voltage resistance: AC1000V 50/60Hz 1min
Vibration (durability): 10 ~ 55Hz double amplitude 1.5mm X, Y, Z in all directions 2H
Impact (durability): 3 times in each direction of 500m/s**2 X, Y and Z
Protection grade: IEC standard: IP64
Connection mode: lead lead type (length of wire: 2m)
Quality (after packing): About 65g
Material shell: ABS