Weld Cleaning Knotted Wire Cup Brush Green Body 3 Inch OD With M10 Nut
Weld Cleaning Knotted Wire Cup Brush Green Body 3 Inch OD With M10 Nut
This twisted wire cup brush is designed to scour metal, making it perfect for cleaning weld beads, deburring machined surfaces, and removing sharp edges from sheet metal.
The cup brush has a universal arbor to fit most grinders and a powder coat finish that resists rust and corrosion.
Universal NPT arbor fits most 4 in. to 4-1/2 in. grinders
| Outer diameter | 75mm |
|---|---|
| Nut size | M10*1.5 |
| Wire material & Wire Dia. | 0.5mm carbon steel wire |
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.