High Tensile Crimped Conical Wire Brush 115MM OD With M14 Nut Size
High Tensile Crimped Steel Conical Wire Brush 115MM For Welding Seams
- Fits M14 angle grinders (thread size).
- Strong steel brush wires.
- Arbor M14 x 2.
- Maximum RPM: 11,000
Product Description
1. Perfect for removing paint / rust etc., deburring and edge blending.
2. Twisted bristles enables the brushes to be strong and tough.
3. Ideal solution for weld cleaning, preparing rough surfaces, and fast removal of paint, scale and rust
4. Nut size :you could choose M10X1.25, M10X1.5 ,M14X2 ,M16X2, 5/8''-11 UNC
Steel Wire Bevel Brush
| Outer diameter | 115mm |
|---|---|
| Nut size | M14*2.0 |
| Wire material & Wire Dia. | 0.5mm carbon steel wire |
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.