Abrasive Disc Segment CNC Deburring Brushes For Limestone Slate Surface Finish
Good Finish 150mm Turbine Style Abrasive Disc Segment Deburring Nylox Brush
1. Outer Diameter available from100 to 600mm for Disc Brushes.
2. Optional coupling available for fitment in various machines.
3. Material for Base –Wood, HDPE, PVC, Plastic, Nylon, Teflon, Aluminum etc.
4. Density of Bristle is optional as LOW, MEDIUM, and HIGH.
5. Type of Bristle or Brush Strings- Nylon, Polypropylene, PVC, PET, Teflon, PVC, Abrasive 6. Silicon Carbide Bristle, Abrasive aluminum Oxide Bristle, Steel Wire, S.S Wire, and Brass Wire etc
7. Disc Brushes with Custom Sizes can be manufactured at short notice.
Dimensions:
Abrasive Disc Segment Deburring Nylox Brush
|
Outer Diameter
|
150mm |
|
Inner Hole
|
25.4mm |
|
Base thickness
|
20MM |
|
Bristle height
|
25mm |
|
Bristle Dia.
|
1.0mm |
Applications:
• Ideal for deburring any flat machined auto parts
• Deburring face milled casting and forgings
• Edge blending and edge radiusing operations
• Fine blank deburring
• Engine block and cylinder head deburring
• Surface finish and removing burrs on hydraulic components
• Rust and scale removal
• Clean pre-cast concrete moulds
• Sanding and texturing wood surfaces
• Surface conditioning alloy wheels
Abrasive Brushes are used in marble, granite, limestone slate, sandstone, travertine and so on. Through grinding the surface of the stone, it could get the archaized effect.
It adopt from DuPont U.S.A (Nylon 612 with grit inside),it has the advantage of high speed of aggressive, long life and good polish effect which have been sold far Europe,Asia,Middle East and so on
Grain:Steel,Steel+36#,24#,36#,46# ,60#,80#,120#,180#,240#,320#,500#.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.