Mini Size Jewelry Laser Welding Machine 60w With Factory Price

Mini size jewelry welding machine 60w with factory price

Machine Feature:
1. Energy, pulse width, frequency and focal length can be adjusted in a wide range to achieve different welding effects
2. The laser pump cavity adopts imported ceramic reflector, which is corrosion-resistant, high-temperature resistant, and has high electro-optic conversion rate.
3. Adopt the world's leading automatic shading system to remove harmful light to the eyes during operation
4.24 hours continuous operation, stable performance
5. Maintenance free within 10000 hours
6. Personalized design in line with ergonomic principles

Machine dimension of 60w

What material the small jewelry laser welding machine works?

This welding application is great for precious metals, which is why most jewelers in Australia use jewelry laser welding machines.

All traditional jewelry metals can be laser welded:

all base metals
Krakin
Sterling silver
titanium
palladium
platinum
Platinum is one of the most difficult metals in history to machine and repair, and one of the easiest to laser weld. It is also possible to weld dissimilar metals together, such as gold to platinum and sterling silver to gold.

 
Operating system supported languages: Chinese, Turkish, Arabic, English, Korean
 
1. Observation system: The observation system of this jewelry spot welding machine consists of a microscope and a built-in high-definition CCD camera. Users can choose one or both of them as the observation method according to their needs. Both can clearly observe the welding position of the workpiece, which is convenient for welding.
 
2. Adjustment of the CCD cross cursor: If the light spot is not in the center of the cross cursor in a very clear position of the CCD camera system, you can change the position of the cross cursor by clicking the middle position of the four cross cursors.​​​ the sides of the screen so that the solder joint is in the center of the cursor
 
3. For welding operations, first ensure that the machine has been turned on normally, put the workpiece into the sight of the observation system, and then slowly move to the clearest position of the observation system.
Point the cursor to the desired welding position, gently step on the foot switch, the machine has laser output for welding.
 
4. Parameter adjustment, focusing, after the first welding, the welding effect of the solder joint does not meet the requirements, and the parameters need to be adjusted again. Focusing (-3.0-+3.0) makes the welding effect meet the requirements, and will not repeat the welding in the future. Needs to be readjusted.

Specification

Welding Samples

Video