MINI 200W Jewelry Laser Welding Machine For Ring Bangle Bracelet Platinum Soldering
 
This welding machine is specially developed for laser welding of jewelry, mainly used for punching and spot welding of gold and silver jewelry. Laser spot welding is an important aspect of the application of laser processing technology. The spot welding process is heat conduction, laser radiation heats the surface of the workpiece, and the surface heat diffuses into the interior through heat conduction, and the workpiece is melted through control. The width, energy, peak power, and repetition frequency of the laser pulse that forms a specific molten pool. Because of its unique advantages, it is widely used in the production process of gold and silver jewelry and the welding of micro-small parts
 
Jewelry laser welding machine for ring bangle bracelet platinum soldering Details

 
 
Specification of jewelry laser soldering machine

 
 

Machine video

 
Samples

 
Application of 200W jewelry laser welding machine for ring bangle bracelet platinum
 
Jewelry laser spot welding machines are widely used in aviation, aerospace, sporting goods, jewelry, golf clubs, medical equipment, aluminum alloy dentures, instrumentation, electronics, machining, automotive and other industries, especially suitable for perforating gold and silver jewelry , Welding of spot welds, inlaid force plates and claw foot parts
 
 
How to operate the jewelry laser welding machine for ring bangle bracelet platinum
Operating system support languages: Chinese, Turkish, Arabic, English, Korean
 
1. Observation system: The observation system of this jewelry spot welding machine consists of a microscope and a built-in high-definition CCD camera. Users can choose one or two of them as the observation method according to their needs. Both can clearly observe the welding position of the workpiece, which is convenient for welding.
 
2. Adjustment of the CCD cross cursor: If the CCD camera system is in a very clear position and the light spot is not in the center of the cross cursor, you can change the position of the cross cursor by clicking the four middle positions.​​​ On both sides of the screen, make the solder joints in the center of the cursor
 
3. For welding operation, first ensure that the machine is turned on normally, put the workpiece into the sight range of the observation system, and then slowly move to the clearest position of the observation system.
Aim the cursor at the desired welding position, gently step on the foot switch, the machine has laser output for welding.
 
4. Parameter adjustment and focus adjustment. After the first welding, the welding effect of the solder joints does not meet the requirements, and the parameters need to be re-adjusted. Adjust the focal length (-3.0-+3.0), so that the welding effect can meet the requirements, and the welding will not be repeated later. Need to be adjusted again.