Low Carbon Steel Galvanized Johnson Vee Wire Screen With ISO9000 Certificate
| Attribute | Value |
|---|---|
| Material | Low carbon steel |
| Grade | Q235 |
| Slot size | 1.0mm |
| Diameter | 6" |
| Length | 2900 mm |
| End connection | Welded rings |
| Package | Woden box, Container |
Jonson Vee Screen Low Carbon Steel Galvanized 30 Bar 20 Slot OD 168 6"
Jonson Vee wire screen is made of the continuous slot, designed to provide maximum open area to reduce entrance velocity, increase hydraulic efficiency and promote more effective development. Both the inner and outer screens shall be constructed of V-shaped wire continuously wrapped around an array of equally spaced support rods of the same material. Each junction of wire/rod contact shall be resistance welded. The wrapped wire is V shape, and the support rod is O shape. Filter from outside to inside.
| Parameter | Value |
|---|---|
| Material | Low carbon steel galvanized |
| Grade | Q235 |
| O.D | 168 mm |
| Size | 6" |
| Slot size | 1.0 mm |
| Length | 2.9 m |
| End connection | Welded rings |
| Wire size | 93 # |
| Support rod | 120 # |
| Wire shape | V shape |
| SIZE (INCH) | O.D (MM) | SLOT (MM) | LENGTH (M) | COLLAPSE STRENGTH (BAR) | TENSILE WEIGHT (TON) | WRAP WIRE(WIDTH*HEIGHT) (MM) | RODS (MM) |
|---|---|---|---|---|---|---|---|
| 3-1/2 | 88.9 | 1.0 | 3 | ＞22 | 10.2 | 2.3*3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | ＞28 | 11.5 | 2.3*3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0 | 6.0MM*32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.3*3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | ＞80 | 37.8 | 3.0*5.0 | 4.0MM/59 |
- Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
- Low cost operation Screens with high open area shall favor groundwater infiltration. Abundant water shall reduce the water level's down, thus to save energy consumption.
- Reduce the abrasion of the pump - Under the same condition, high open area can make the speed of groundwater's entering into the screen much slower than any other filtration apparatus, which will avoid sand's entering into screen because of high pressure, thus reduce the abrasion of the pump.
- Extend the life span of wells - Comparatively, groundwater's entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells.
Please tell us the specification of the wire screen you need, and we will help you to process the high quality products.
- Filter pipe material: mainly stainless steel, carbon steel galvanized, carbon steel spray or other customer requirements material.
- Gap: 0.1mm-15mm, arbitrarily selected screen size to meet different construction requirements.
- Diameter: 2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 20". 29 mm - 1000 mm.
- Length: 2.9 M, 5.85 M. Up to 6 M.
- Connection form: groove connection/weld ring connection or thread connection.
- Water Well
- Waste Water Treatment
- Water supply systems
- Coal & Mine
- Food Processors & Beverage Screens
- Environmental protection
- Refining & Petrochemical
- Architecture & Construction
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.