Z2L RFID Reader
EM Marine
iButton (Dallas TM), Wiegand 26
12 V
35 miliamper
TU 4372-002-38111914-2015
GENERAL INFORMATION
Controller is used in access control systems (ACS).
It is used to read and transfer ID numbers to the
controller
key fobs or bracelet with mark
standard
EM-marine
via protocol
Dallas Touch Memory (Ibutton) или Wiegand 26.
APPEARANCE AND DIMENSIONS
READER OPERATION
In standby mode, there is a red light.
At the moment of touch by key fob, the red light will turn off for one second.
While the card close to the reader, the light indication is disabled.
If the jumper of light control is cut, there is no red light in standby mode, but there will be
the light for one second at the moment of touching by key fob.
PURPOSE OF PINS
Color - Purpose of wire
Red - Power Plus from 8 to 18 V.
Black - power minus, common wire.
Blue - Data 0
White - Data 1 / Output Dallas TM, TM centeral.
Brown - a jumper, to disable the backlight cut.
WIRING
DELIVERY SET
Reader - 1.
Nut - 1 pc
Packaging - 1 pc.
READER INSTALLATION
The reader is mounted on a flat surface in place where you can touch the key fob to
reader without any problems
Mark and drill the hole for mounting the reader.
Insert the reader into the hole and secure it with mounting nut
Connect the wires to the reader.
1 - red LED
2 - retention ring
SPECIFICATIONS
Operating frequency: 125 kHz
Type readable cards: EM Marine
Range of card reading to 2-6 cm
Protocol for connection to the controller: iButton (Dallas Touch Memory, emulation
DS1990A), Wiegand 26
Maximum length of line from reader to controller: up to 15m
Power supply: 8 - 18 VDC
Current consumption: 35 mA
Light indication: Red LED
Housing material: Polyamide
Size (mm): Diameter 25 mm., Height 22 mm.
OPERATING CONDITIONS STORAGE AND TRANSPORT
Converter is designed to operate in the absence of:
Atmospheric fallouts, sunshine and humidity condensation.
Operating conditions
Temperature from -30 ° C to +40 ° C;
Relative humidity less than 98% (at 25 ° C).
When there are changes in maintenance conditions, the specification of product may
differ from the nominal values.
Storage conditions (group L according to GOST 15150-69)
Temperature from +5 ° C to +40 ° C;
Relative humidity less than 80% (at 25 ° C).
Transportation conditions:
Temperature from -50° C to +50 ° C;
Relative humidity less than 98% (at 25 ° C).
WARRANTY
The warranty period is 12 months from the date of sale. Reasons for termination of the
warranty:
- nonadherence to the following manual;
- mechanical damages;
- the evidence of impact of water and corrosive substances;
- the evidence of improper interference in the circuit.
- Lifetime - 6 years.