Spherical Roller Bearing V5 V3 P0 P5 P3 Neutral packing high quality Bearings 22212CA CHROME STEEL

^{22212CA 22212CAK 22212CARS P0 P6 P5 P3 P4 P2 Quality LEVEL CHROME Spherical Roller Bearings}
 

^{Product introduction}
 

^{Spherical roller bearings 22212 with two rollers, mainly bear radial load, but also can withstand axial load in either direction. A high radial load capacity, especially suitable for heavy loads or vibration, but can not bear the pure axial load. This kind of bearing outer ring raceway is spherical shape, so the good performance of its self-aligning, can compensate concentricity error.}

^{Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.}

• ^{Accommodate misalignment}
• ^{High load carrying capacity}
• ^{Relubrication features}
• ^{Low friction and long service life}
• ^{Increased wear resistance}
  
  

  ^Dimensions

  d	60 mm	Bore diameter
  D	110 mm	Outside diameter
  B	28 mm	Width
  d2	≈72.7 mm	Shoulder diameter of inner ring
  D1	≈96.5 mm	Shoulder/recess diameter of outer ring
  b	6 mm	Width of lubrication groove
  K	3 mm	Diameter of lubrication hole
  r1,2	min.1.5 mm	Chamfer dimension

   

  ^{Abutment dimensions}

  da	min.69 mm	Diameter of shaft abutment
  Da	max.101 mm	Diameter of housing abutment
  ra	max.1.5 mm	Radius of fillet

   

  ^{Calculation data}

  Basic dynamic load rating	C	159 kN
  Basic static load rating	C0	166 kN
  Fatigue load limit	Pu	18.6 kN
  Reference speed		5 600 r/min
  Limiting speed		7 500 r/min
  Limiting value	e	0.24
  Calculation factor	Y1	2.8
  Calculation factor	Y2	4.2
  Calculation factor	Y0	2.8

   

  Bore diameter:	60mm		Lubrication hole type:	Lubrication Groove & Hole
  Outside diameter:	110mm		Operating temperature range:	Maximum of +390 °F
  Overall width:	28mm		Cage material:	Steel
  Bore type:	Tapered Bore		Bearing material:	Steel
  Outer ring type:	Not Split		Cage type:	Inner Ring Guided
  Internal clearance:	C3		Precision rating:	Not Rated
  Closure type:	Open		Finish/coating:	Uncoated

• ^{The recommended product can be matched with the bearing}
   

  MSG-27P	NUP2206	NUP206	NUP2208=210	NUP207	NUP207/NUP306	NUP309	T7FC055
  AP5S53	NUP2207	6305M	NUP307=110	NUP307	30309D	30312D	T7FC055
  M5X130	NUP2207	4T-30307	30312	NUP307	30312D	30314D	32207
  M5X180	NUP207=120	NUP306	30312D	NUP2208	NUP2209	30312D
  32205	NUP2209=160	NUP307	30312D	NUP2211	NUP2209	6008
  T7FC060	NUP2207=140	HMK3525+IR	NUP310	NUP308	NUP2209	NUP307
  NUP207	NUP2206=130	30309D	NUP308	NUP309	NUP2212	30311D
  6213	NUP309=180	30210	NUP306	NUP309	NUP2212	T7FC055
  NUP308	NUP309=180	30210	NUP307	NUP2212	NUP2211	NIP2310
  NUP309	NUP310	30311D	NUP205E	30312D=155	30312D=155	NUP208E
  JMF29	SG08	SG04	GM35VA	M2X96	M2X120	NUP308=140
  JMF23	GM17VA	SG025	GM35VL	MCB172	M2X146	T7FC065
  JMF151	JMV-44/22	SG02	GM38VB	HMT36FA	M2X150	NUP207
  JMF195	JMV-53/31	SG15	MAG150	HMGC32	M2X170	HMS072
  JMF250	MAG85	SG20	TM09	HMGF35	M2X210	AP5S67
  M2X55	MAG120	KMF41-PC60-7	GM18VL	HMGF36	HMGF57	11749/11710
  M2X63	MAG150	KMF90-PC200-6	KMF125-PC200-7	HMGC48	DNB50/60	NUP2310

  
  ^{Picture Show}
  
  
  

  FAQ
  Q1: I want to buy your products, how can I pay?
  A :You can pay via T/T , L/C , WEST UNION , ESCROW , PAYPAL , ETC. Especially ESCROW, which is guaranteed by Alibaba.com. It is safe and effective.

  
  Q2: How can you guarantee the quality?
  A: If you meet with quality problem, we promise to replace goods or return your funds.

  
  Q3: If we don’t find what we want on your website, what should we do?
  A: You can email us the descriptions and pictures of the products you need, we will check whether we have them. We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample by express, we will develop this item for bulk purchasing.

  
  Q4: Can we buy 1 pc of each item for quality testing?
  A: Yes, we are glad to send 1pc for quality testing if we have the item you need in stock.

  
  Why choose us?
  1. Let’s talk—we have NO barrier in language.
  2. Request for more item information---there are nearly 2000 products for your option!
  3. Write us for quotation---reply you within 24 hours,one quotation could be ready in 2mins for a ready products!