Welding Mobile Fume Extractor Smoke Filter Dust Collector KSJ-2.2S

Workshop Air Filter Product Introduction

The welding fume extractor can filter a large number of fine metal particles suspended in the air that are harmful to the human body generated during welding, grinding, cutting, polishing and other processes. It has high filtration efficiency and low noise. The mobile welding fume extractor , it has the features of flexible use, small footprint, economical and practical, and wide application.

Parameters

Options:

1. 3×415V 50Hz, 3×220V 60Hz is avaliable.

2. It can make one arm of φ200mm flexible hose.

3. ATEX type is avaliable.

4. It can change polyester material filter cartridge.

Smoke Filter Features

1. Apply to all kinds of smoke filtration caused by welding, grinding, cutting, as well as recycling of rare metals, precious materials, etc.

2. Suction arm can be rotated 360° freely, according to actual working condition, the suction air volume can be adjusted by adjusting volume valve

3. This extractor adopted imported material of PTFE coated filter cartridge, for dust (above 0.3um) filtration efficiency can reach 99.9%, meanwhile maintain a high air flow. It is ideal for purifying dry, oil-free, non-corrosive fume mixture generated in welding and cutting, collecting rare metals and valuable materials.

4. It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.

5. Equipped with pulse automatic back blow cleaning system, to insure the stable blowing rate; the air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.

6. The operation panel is clear and simple, very easy to operate.