Mobile welding fume extractor customized active carbon filter

Production introduction

1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals,

   precious materials, etc.

2. For the KSJ-0.7B model purifier, its electric control is simple, automatically cleaning relying on

    the internal pressure sensors, and also can by manual. There are 3 stages filtering layer with the

    interception net. It will also increase the active carbon filter layer according to working conditions or

    clients, the filtering effeciency is very high, the active carbon filtering layer will reduce the peculiar smell

    in the air.

3. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature,

    wear-resistant compounded materials, without crack and damage to sparks, its life shorter than the

    model of intelligent.

4. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection

    measures when too high temperature.

5. Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air

    by pulling the handle of the hood with the operator’s will flexibly and easily and position by itself in the

    absence of external force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.

6.The filter elment of the welding fume extractor is made of imported filter material of high filtration

    precision, and the filtration precision reaches 0.3 μm. In accordance with the extractor work intensity

    and the amount of dust, the usage life of the filter is different. On the control panel, it includes:

    -Fan switch

    -Pressure difference indicator

Technical Parameters