44mm Hose Diameter 450m3/H Welding Vacuum Fume Extractor
2020 KAISEN Economical High Vacuum Fume Extractor, Welding Fume Extraction Units
Technical parameters
| No. | Item | Parameter |
| 1 | Fan type | Vacuum fan |
| 2 | Treatment of air flow | 450±10 m3/h |
| 3 | Motor power | 3.4 kW |
| 4 | Power supply | 3×380V/50Hz or 220V/60Hz |
| 5 | Filtration area | 20 m2 |
| 6 | Cleaning way | Full-automatically cleaning |
| 7 | Maximum vacuum pressure | 26000-29500 Pa |
| 8 | Number of cartridge filters | 2 pieces |
| 9 | Filter medium | Polyester PTFE membrane |
| 10 | Filtration efficiency | >99.9% |
| 11 | Solenoid valve | 2 pieces |
| 12 | Compressed air | 5～6 bar |
| 13 | Suction hose diameter | 44mm |
| 14 | Noise | ≤72±5dB(A) |
| 15 | Weight | 265±10kg |
| 16 | Dimensions | 700(L)×700(W)×1850(H)mm |
Kaisen supplies their fume extractors with their proprietary filter, an ultra-efficient filter capable of capturing the sub-micron sized particles generated by welding processes. Their special designed filters have a HEPA 12 rating, and allow efficient air flow through the filter for strong suction power. They are made of Japanese imported material that lasts up to two times as long as those conventional filters.
Work principle
The high-pressure fan will generate a strong vacuum suction force, forcing the fume to move to the air inlet and enter the extractor for purification. While the wire mesh filter filters out sparks, the fume is evenly divided by the deflector, and then filtered by the filter cartridge. At the same time, the large particles fall into the dust collector/fume extractor under the action of gravity, while the small particles float in the vortex caused by suction and be filtered by the extractor. Small particles coalesce on the layer surface of the filter cartridge, and then fall into the dust box under the action of gravity. The purified air is discharged into the workshop through the air outlet.
Product introduction
The mobile high vacuum fume dust collector is an air purifier with advanced technology and technology independently developed by our company according to the specific conditions of the welding, cutting and polishing workshops. Easy to operate.
The fume from the machining process will be sucked into the air extractor through the fume hood. First, the fume will pass through the first layer of spark interception steel mesh, which will separate and intercept sparks immediately. And the smoke enters the second layer, the filter preventer plate, to prevent residual sparks from directly entering the main filter layer. Finally, the fume enters the third layer, the main filter cartridge, for final purification.
The air extractor has a front connector, which can be connected to various professional suction hoses, suction welding torches or breathing masks through a Φ44mm hose. By connecting with Φ44mm hoses and professional nozzles, the nozzles of robots and welding machines can also be fixed on the welding torch, and move with the welding torch to simultaneously absorb welding fumes. It can also be used for welding testing and cleaning of training sites.
The extractor can be connected to the nozzles of various magnetic suction cups through a hose, or can be connected to a high vacuum suction welding gun.
Application:
Welding fume Filtration,Welding fume Killer system
Robotic Welding Fume Extraction & Dust Extraction
Soldering Fume Filtration
Laser Fume Filtration
Hazardous Fume / Dust Filtration / Odour Removal
Medical Lab Gas / Fume / Dust Filtration
Pharmacy lab Dust Filtration
Custom Made Ducting With Exhaust Systems
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.