PTFE Filter 2600m3/H Laser Welding Mobile Fume Extractor
High Quality Portable Welding Fume Purifier Dust Collector with CE Certificate KSZ-3.0D
Product introduction
KSZ series multifunctional mobile fume extractors adopts intelligent PLC system, displays real-time operating parameters, and can realize automatic cleaning according to the monitoring of differential pressure sensor. Its freely movable suction arms can be easily extended or rotated 360°, and its suction hood is also simple to position above any welding workstation without any external support, which allowing welders to position the hood wherever it’s needed.
Working principle
Separation: dust laden fume are sucked into the extractor by the suction force induced by fan’s working, with deflector fume’s flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filter
cartridge. The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge’s interior and then discharged into workshop directly or out of the workshop through pipe line.
Cleaning: When dusts accumulate continuously on filter cartridge’s surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge’s surface, dusts fall into dust collector under gravity, thus the whole cartridge’s surface is cleaned.
This extractor can be automatically cleaned and manually cleaned, automatically cleaning is as following:
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation pulse blow cleaning.
2. When the fan stops working, the system will implement rotation pulse blow cleaning for three times.
Technical parameters
|
No. |
Item | Parameter |
| 1 | Fan type | centrifugal fan |
| 2 | Treatment of air flow | 2600±100 m3/h |
| 3 | Motor power | 3 kW |
| 4 | Power supply | 3×380 or 415V/50Hz |
| 5 | Filtration area | 20m2 |
| 6 | Number of cartridge filters | 2 pieces |
| 7 | Filter medium | PTFE coated filter element |
| 8 | Filtration efficiency | >99.9% |
| 9 | Solenoid valve | 2 pieces |
| 10 | Compressed air | 5～6 bar |
| 11 | Ash hopper volume | 15L |
| 12 | Noise | ≤74±5dB(A) |
| 13 | Weight | 266±10kg |
| 14 | Dimensions(excluding suction arm) | 800(L)×800(W)×1633(H)mm |
Text screen
Our Market
Package & Shipping
Package: Package Used Wooden Box without Fumigation
The package would include spare parts box and machine installation tools.
Transportation By Sea or By Air are both Acceptable.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.