CE RoHS Certification Large Air Flow Welding And Cutting Fume Remover With φ250mm Suction Arm

Features

1. The fume extractor applies to all kinds of soot purifications caused by welding, grinding, as well as recycling of raremetals, precious materials, etc
2. For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make ita longer life, more secure and reliable.
3. Intelligent model using PLC automatic control makes operation easy; filter rotates with the use of full-automaticcleaning in all directions, so that there is a more thorough cleaning filter surface, always to guarantee aconstant air volume absorption; Filter is made of imported microporous PTFE film.
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protectionmeasures when too high temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage for sparks but longer life.

Application

1. Thick steel plate welding will produce large fume, KSZ-3.0D1 2800 m3/h air flow will meet this working condition.
2. Small power ( under 2000W) and size laser cutting table, it has two pieces filters.
3. Explosion-proof type dust disposal of air flow requirement under 2800 m3/h.

Technique Data