Mobile Dust Extractor 2.2kW With Self Supporting Suction Arm KSJ-2.2S

Fume Extractor Product Description

Mobile welding fume extractor has two directional and two rotary polyurethane casters with brake device for easy moving and stationing. It is suitable for the purification of fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material.

Parameters

Features

1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious materials, etc.

2. For the potential of fire and molten slag particles, two protective measures are used inside purifier, to make it a longer life, more secure and reliable.

3. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection measures when too high temperature.

4. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage to sparks, its life shorter than the model of intelligent.

5.Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by pulling the handle of the hood with the operator’s will flexibly and easily and position by itself in the absence of external force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.

6. Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will not crack after burning through by spark with longer life; the arm diameter is160mm.