RAL1003 signal yellow decorative powder coating for metal security door

Test References:

* CURE SCHEDULE = 375F/15 MIN @ PART METAL TEMPERATURE
* GLOSS LEVEL = 95%+ ON 60 DEGREE METER
* RECOMMEND FILM THICKNESS = 1.8- 2.2 MILS
* SPECIFIC GRAVITY = 1.19
* THEORETICAL COVERAGE = 80.1 SQ. FT.
* SALT SPRAY RESULTS = 1,000+ HOURS

*** CLEAR COAT NEEDED. POWDER365 RECOMMENDS A CLEAR FOR PROLONGED EXTERIOR USE AND IMPROVED MAR RESISTANCE.

Applications:
Residential – Commercial – Industrial – Architectural – Marine
Automotive – Motor Cycle Frames – Wheels & Parts
Bicycles Frames & Parts – ATV’s – Airboats
Aluminum Extrusions – Decorative Metal – Trade Show Exhibits
Retail Displays – Fixtures – Sand Blasting

Pre-treatment
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:

Main Component and Application
This type of powder coating is prepared from epoxy and polyester resin. Exclusive used on security door, wooden-imitation door, fire door, metal door and etc.

Products Series
Provide all kinds of transfer powder, ultra-leveling transfer powder, transparent powder, flame retardant powder, automatic vacuum transfer powder; and various types of art powder with metallic effect.

Curing Condition
190ºC (workpiece temperature), 15 minutes

Product Features
Transfer powder have best transfer effect, easy tearing, best leveling, save powder. The metal powder effect lifelike, elegant.