Customized Heavy Duty Long Stroke Tipper Dump Truck Hydraulic Cylinder

    For the selection of hydraulic cylinders, we generally use the hydraulic cylinder in the process of which will be in accordance with the diameter, stroke, the use of pressure, the type of installation to select the hydraulic cylinder, in addition to these in addition to the following points is worth our attention to, first of all hydraulic cylinder After the load speed reaches a certain standard above, you must use the hydraulic cylinder with a buffer device. Or to reach higher speeds must be in the hydraulic cylinder, the installation of deceleration valve. Followed by carefully selected hydraulic oil and seal. Different hydraulic oil droplets with different seals, to ensure the life of the hydraulic cylinder.
Because the hydraulic cylinder to withstand a lot of pressure, the heavier the load, the greater its pressure, therefore, do a good job of hydraulic cylinder maintenance is the most important part of the entire hydraulic system maintenance.
First of all, to rust. Because the hydraulic cylinder piston part of the working state is to stick out of the cylinder, will naturally be oxide, acid gas erosion, which requires us to apply it with the right amount of grease to protect, as a load-bearing parts of the piston Eroded and broken at work.
    Second, to open the box to change oil. Because of prolonged use, will inevitably have foreign matter into the hydraulic cylinder, so that friction occurs in use will occur, in addition, the hydraulic oil is also a certain service life, long time do not change the oil will damage or erosion of the hydraulic cylinder.
    Therefore, in the work of the hydraulic cylinder to control the speed appropriate, not more than 2m / s, so you can extend the life of the hydraulic cylinder, in addition to the protection of institutions and safety reasons, the internal installation of buffer device for hydraulic cylinder protection is very Effective.