1500W 3 Phase Servo Motor Driver Servopack For Industrial SGDH-15AE-Y291
Price:
negotiable
MOQ:
1
Delivery Time:
2-3 work days
Brand:
Yasakawa
Product Description
Industrial Servo Drives Yaskawa Servo Drives SGDH-15AE-Y291 1500W 3Phease
Quick Details
Brand Name:Yaskawa
Model Number:SGDH-15AE-Y291
Input Voltage:200-230V
Input Current: 9.5A
Input Frequency:50/60HZ
Input PH : 3
Series : Sigma 2 (Σ-II Series)
Output Power : 1.5KW
Output Voltage: 0-230V
Output Current: 11.6A
Output Frequency:0-300Hz
Output PH :3
Temperture: 0-55℃
Place of Origin:Japan
Efficiency:IE 1
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
Similar Products
| SGDH-08AE |
| SGDH-08AE/08ADA |
| SGDH-08AE-OY |
| SGDH-08AE-SY202 |
| SGDH-08DE |
| SGDH-10AE |
| SGDH-10AE/10ADA |
| SGDH-10AE-0Y |
| SGDH-10AE-R |
| SGDH-10DE |
| SGDH-15ADA |
| SGDH15AE |
| SGDH-15AE |
| SGDH-15AE-OY |
| SGDH-15DE |
| SGDH-1AAE |
| SGDH-20ADA |
| SGDH-20AE |
| SGDH-20AE-N2-RY49 |
| SGDH-20AE-OY |
| SGDH-20DE |
| SGDH-30AE |
| SGDH-30AE.50AE |
| SGDH-30DE |
| SGDH-50AE |
| SGDH-50AE-RY342 |
| SGDH-50AE-RY415 |
| SGDH-50DE |
| SGDH-60AE |
| SGDH-75AE |
| SGDH-75E |
| SGDH-A3AE |
| SGDH-A3BE |
| SGDH-A5AE |
The power voltage must not exceed 230V +10% (253V). If it is likely that it will exceed this limit, use a step-down transformer. For types SGDH-08AE-S and SGDH-15AE-S, voltage is 200 to 230V + 10% -5%.
Use the servo amplifier within the ambient temperature range. When enclosed, the temperatures inside the cabinet must not exceed the specified range.
Use the servo amplifier within the ambient temperature range. When enclosed, the temperatures inside the cabinet must not exceed the specified range.
Speed regulation is defined as follows:
Speed Regulation = (no-load motor speed - full load motor speed) / rated motor speed x 100%
Forward is clockwise viewed from the non-load side of the servomotor, (counterclockwise viewed from the load and shaft end).
The built-in open collector power supply is not electrically isolated from the control circuit in the servo amplifier.
| asic Specifications | Input Power Supply | Main Circuit1 | Three-phase (or single-phase) 200 to 230VAC +10% to -15%, 50/60 Hz, or single-phase 100 to 115VAC +10% to -15%, 50/60 Hz | |
| Control Circuit1 | Single-phase 200 to 230VAC (or 100 to 115VAC) +10% to -15%, 50/60 Hz | |||
| Control Mode | Three-phase, full-wave rectification IGBT PWM (sinusoidal commutation) | |||
| Feedback | Serial incremental encoder, absolute encoder | |||
| Location | Ambient/Storage Temperature2 | 0 to 55ºC / -20 to 85ºC | ||
| Ambient/Storage Humidity | 90% or less (no-condensing) | |||
| Vibration/Shock Resistance | 4.9m/s2/19.6m/s2 | |||
| Structure | Base mounted (duct ventilation available as option) and flat mount type | |||
| Speed/Torque Control Mode | Performance | Speed Control Range | 1 : 5000 (The lowest speed of the speed control range is the speed at which the servomotor will not stop with a rated torque load.) | |
| Speed Regulation3 | Load Regulation | 0% to 100%: 0.01% max. (at rated speed) | ||
| Voltage Regulation | Rated voltage ±10% : 0% (at rated speed) | |||
| Temperature Regulation | 25 ± 25º°±C : 0.1% maximum (at rated speed) | |||
| Frequency Characteristics | 400Hz (at JL = JM) | |||
| Accel/Decel Time Setting | 0 to 10s (Can be set individually for acceleration and deceleration). | |||
| Input Signal | Speed Reference | Reference Voltage4 | ±6VDC (variable setting range: ±2 to ±10VDC) at rated speed (forward rotation with positive reference); input voltage: ±12V (maximum) | |
| Input Impedance | Approximately 14kW | |||
| Circuit Time Constant | — | |||
| Torque Reference | Reference Voltage4 | ±3VDC (Variable setting range: ±1 to ±10V) at rated torque (forward rotation with positive reference), input voltage: ±12VDC (maximum) | ||
| Input Impedance | Approximately 14kW | |||
| Circuit Time Constant | Approximately 47µs | |||
| Contact Speed Reference | Rotation Direction Selection | Uses P control signal | ||
| Speed Selection | Forward/reverse rotation current limit signals are used (1st to 3rd speed selection). When both signals are OFF, the motor stops or enters another control mode. | |||
| Positioning Control Mode | Performance | Bias Setting | 0 to 450rpm (setting resolution: 1rpm) | |
| Feed-forward Compensation | 0 to 100% (setting resolution: 1%) | |||
| Position Complete Width Setting | 0 to 250 reference units (setting resolution: 1 reference unit) | |||
| Input Signal | Reference Signal | Type | Sign + pulse train, 90º phase difference 2-phase pulse (phase A + phase B), or CCW + CW pulse train | |
| Pulse Buffer | Line driver (+5V level), open collector (+5V or +12V level) | |||
| Pulse Frequency | Maximum 500/200kpps (line driver/open collector) | |||
| Control Signal | CLEAR (input pulse form identical to reference pulse) | |||
| Built-in Open Collector Power Supply 5 | +12V (With built-in 1kW resistor) | |||
| I/O Signals | Position Output | Output Form | Phases A, B and C: Line driver output Phase S: Line driver output (Only when absolute encoder is used) |
|
| Frequency Dividing Ratio | Any | |||
| Sequence Input | Servo ON, P control (or forward/reverse rotation in contact input speed control mode), forward rotation prohibited (P-OT), reverse rotation prohibited (N-OT), alarm reset, forward rotation current limit, and reverse rotation current limit (or contact input speed control) | |||
| Sequence Output | — | Servo alarm, 3-bit alarm codes | ||
| Configurable: (Any 3 of these signals) | Positioning complete (speed coincidence), servomotor rotating, servo ready, current limit, brake release, warning, and near position signals | |||
| Built-in Functions | Dynamic Brake (DB) | Activated at main power OFF, servo alarm, servo OFF or overtravel | ||
| Regenerative Processing | Incorporated. For 60 to 1A types, external regenerative resistor must be mounted. | |||
| Overtravel (OT) Prevention | Motor decelerates or coasts to a stop, or is stopped by a dynamic brake. | |||
| Protection | Overcurrent, overload, regenerative error, main circuit voltage error, heat sink overheat, power open phase, overflow, overspeed, encoder error, encoder disconnected, overrun, CPU error, parameter error. | |||
| LED Display | POWER, CHARGE, five 7-segment LEDs (built-in digital operator functions) | |||
| Analog Monitor (5CN) | Built-in analog monitor connector to observe speed, torque, and other reference signals Speed: 1V/1000rpm Torque: 1V/rated torque Pulses remaining: 0.05V/reference units or 0.05V/100 reference units |
|||
| Communication | Interface | Digital operator (mount type or hand-held) RS-422A port such as person computer (RS-232C port can be used if some conditions are met). |
||
| 1 : N Communication | N can be up to 14 when RS-422A port is used. | |||
| Axis Address Setting | Set via user parameters | |||
| Functions | Status display, user constant setting, monitor display, alarm traceback display, jogging, autotuning, speed/torque reference signals, other graphing functions, etc. | |||
| Others | Reverse rotation connection, home position search, automatic servomotor ID, DC reactor connection terminal for high power supply frequency control. | |||
- Use the servo amplifier within the ambient temperature range. When enclosed, the temperatures inside the cabinet must not exceed the specified range.
- Speed regulation is defined as follows:
Speed Regulation = (no-load motor speed - full load motor speed) / rated motor speed x 100% - Forward is clockwise viewed from the non-load side of the servomotor, (counterclockwise viewed from the load and shaft end).
- The built-in open collector power supply is not electrically isolated from the control circuit in the servo amplifier.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Wisdomlong Technology CO.,LTD
Location
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact Person
Becky