Durable Industrial Servo Motor T5-1160-25MM MEGALINEAR T5 Open - End Timing Belt
MEGALINEAR open-end belts are particularly suited where the most precise accuracy of position, low noise and long maintenance free cycles are the key requirements.
Megadyne has expanded the Megalinear range to include:
• MEGALINEAR QST
• MEGALINEAR GW
• MEGALINEAR FC
For heavier applications, Megadyne have introduced the MEGALINEAR GW, a high performance thermoplastic polyurethane belt. Superior load capacities can be achieved due to the high shear strength of the tooth design, coupled with high tension, steel zinc coated cords, MEGALINEAR GW guarantees a greater transmittable power under continuous high loads.
MEGALINEAR FC is a new range of belts of the MEGALINEAR family. Specif cally introduced for the food
processing industry, MEGALINEAR FC is manufactured with food contact approved materials, according to
European regulations EU 1935/2004, EU 10/2011 and EU 174/2015. Manufactured in T5/T10 pitch without nose gap between the teeth and available with a variety of backing prof les, for all kinds of conveying and processing applications. These advanced FDA synchronous belts, have excellent resistance to chemicals and corrosion, certified for wet and dry food contact. Their use is particularly prevalent in a variety of applications in food processing and packaging. The homogenous belt design ensures a signif cantly greater service life, with a high level of hygienic integrity.
| STANDARD WIDTHS (mm) | 6 | 10 | 16 | 25 | 32 | 50 | 75 | 100 | 150 |
| Weight (gr/m) | 15 | 20 | 35 | 55 | 70 | 105 | 160 | 215 | 330 |
TABLE II.
| Standard compound: | white Polyurethane thermoplastic 92 ShA |
| Standard back cover: | none |
| Standard tooth cover: | none |
| Standard cords: | S and Z torsion zinked steel |
| Standard width tolerance: | +/– 0,5 mm |
| Standard thickness: | 2,2 +/– 0,15 mm |
| Standard thickness with NFT-NFB: | 2,4 +/-0,15 mm* |
| Standard length tolerance: | +/– 0,8 mm/m |
| Standard roll length: | 100 m |
| Belt options on request with minimum quantity: | Nylon fabric back Nylon fabric teeth Antistatic nylon fabric Transparent FDA compound AVAFC 60/70/85 ShA APL Fishbone Ribbed Cleats |
| RPM (1/min) | 0 | 20 | 40 | 60 | 80 | 100 | 200 | 300 | 400 | 500 | 750 | 1000 | 1500 | 2000 | 3000 | 4000 | 5000 | 8000 |
| F p spec (N/cm) | 24 | 23 | 23 | 22 | 22 | 22 | 20 | 19 | 19 | 18 | 17 | 16 | 15 | 14 | 12 | 11 | 11 | 9 |
Belt width : 6MM 10MM 16MM 25MM 32MM 50MM 75MM 100MM 150MM
JOINED BELT INFORMATIONS
• Minimum splice length 900 mm
• Traction and tooth resistances = 50% less than open-end
• Joined belt can be used only in conveyor systems
• Rolls with NFT, NFB, AVAFC and APL can be joined too
• Minimum diameters according above table
• For coated belts, minimum diameters on page 118
PULLEYS (for more details please contace us for the catalogue)
Good Service in WTL:
> We offer high quality, fast delivery, competitive price for ABB Input Output Module.
> Please send your RFQ to get the latest price.
> Normally, we will ship the items in 1-2 weeks after receive the payment.
> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.
> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.
Liability:
WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
 |  |  |  |  |  |
 |  |  |
|  |  |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.