Electrical plugs SXE9573-Z70-00K Actuation:Sol/Air spring Series:ISO Star Manual Override:Push only

Electrical plugs SXE9573-Z70-00K Actuation:Sol/Air spring Series:ISO Star Manual Override:Push only

Use conditions for mechanical basic valves

(of solenoid actuated valves)

Pilot pressure              max. 10 bar       (if permissible for valve solenoid)

Operating pressure     max. 16 bar       (if permissible for valve type)

Ambient temperature   -15°C ... 40°C   Consider the dew point of supply air (see also air quality) less than the air temperature to prevent ice from forming. When mounting on single sub-bases, the maximum ambient and medium temperature increases from 40°C ... 50°C. 

Medium temperature   max. 40°C

Medium compressed air Recommended air quality acc. to    ISO 8573-1. Indoor at 15°C to 35°C air quality category: 5,6,4 Outdoor until -15°C air quality category: 2,3,3 Use conditions 100% ED 100% duty is allowed even under the most unfavourable permissible operating conditions. It must be ensured that neither the maximum permitted ambient and fluid temperatures nor the limit rating (max.10% overvoltage) are exceeded during operation. The solenoid may need to be protected against overloading.

Volume of operating ports (mostly ports 2 and 4)

min. 30 cm3 min. 30 cm3 min. 60 cm3 min. 120 cm3

for valve series MIDI*STAR SXE**61-***-***

for valve series ISO*STAR ISO1 SXE**73-***-***

for valve series ISO*STAR ISO2 SXE**74-***-***

for valve series ISO*STAR ISO3 SXE**75-***-***

This aims for metallic volumes. In case of materials with worse caloric conductance, larger volumes are necessary. In case of doubt, take measurements.