Industrial Servo Motor R88M-GP10030L OMRON Servomotors has increased to 6,000 r/min, resulting in high-speed positioning
Industrial Servo Motor R88M-GP10030L OMRON Servomotors has increased to 6,000 r/min, resulting in high-speed positioning
Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
Windows is either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
The product photographs and figures that are used in this catalog may vary somewhat from the actual products. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Reduced Tact Time with Higher Speed
Maximum rotation speed : 6,000 r/min*
The maximum rotation speed of R88M-series Servomotors has increased to 6,000 r/min, resulting in high-speed positioning that can reduce tact time.
Industry Top-class Tracking Performance
Speed Response Frequency of 2 kHz
Speed response is representative of servo system characteristics. In the G5, the industry’s fastest response has been achieved at 2 kHz. By improving the speed response by twice compared to previous OMRON models, the stabilization time has been shortened and this contributes to tact time reduction.
Best Positioning Accuracy
Featuring a 20-bit high-resolution incremental encoder
High-precision positioning can be achieved with the built-in encoder, 8 times the resolution of previous OMRON models at 20 bits.
AC Servo Drives
General Specifications
| Item | Specifications | |
|---|---|---|
| Ambient operating temperature and humidity | 0 to 55 °C, 20% to 85% max. (with no condensation) | |
| Storage ambient temperature and humidity | -20 to 65°C, 20% to 85% max. (with no condensation) | |
| Operating and storage atmosphere | No corrosive gases | |
| Vibration resistance | 10 to 60 Hz and at an acceleration of 5.88 m/s2 or less (Not to be run continuously at the resonance point) |
|
| Insulation resistance | Between power supply terminals/power terminals and FG terminal: 0.5 MΩ min. (at 500 VDC) |
|
| Dielectric strength | Between power supply/power terminals and FG terminal: 1,500 VAC for 1 min at 50/60 Hz |
|
| Protective structure | Built into panel | |
| EC Directives * | EMC Directive | EN 55011, EN 61000-6-2, EN 61800-3 |
| Low Voltage Directive | EN 61800-5-1 | |
| Machinery Directives | EN954-1 (Cat.3), EN ISO13849-1 (Cat.3) (PLc, d), ISO13849-1 (Cat.3) (PLc, d), EN61508 (SIL2), EN62061 (SIL2), EN61800-5-2 (STO), IEC61326-3-1 (SIL 2) |
|
| UL standards | UL 508C | |
| CSA standards | CSA C22.2 No.14 | |
| Korean Radio Regulations (KC) | Certified | |
system should be checked by machine builder.
Note: 1. The above items reflect individual evaluation testing. The results may differ under compound conditions.
Note: 2. Always disconnect all connections to the Servo Drive before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure to follow this precaution may result in
damaging internal elements.
Note: 3. Some Servo Drive parts will require maintenance. For details, refer to the G5 series USER'S MANUAL.
Confirm the Manual No. that is listed in Related Manuals.
Note: 4. Vibration, unstable movement, or accoustic noise may occur by an exogenous noise. In such case, please
reduce incoming noise as referred in G5 series user's manuals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.