New Industrial Servo Motor 50W 200V Yaakawa AC SERVO MOTOR SGM-A5A312 Made in Japan

New Industrial Servo Motor 50W 200V Yaakawa AC SERVO MOTOR SGM-A5A312 Made in Japan

 

 

 

QUICK DETAILS

Current: 0.6A

Volatge: 200V
Power : 50W
Rated Torque: 0.159N-m
Max speed: 3000rpm
Encoder: 17bit Absolute encoder
Load Inertia JL kg¡m2¢ 10−4: 0.026
Shaft: straight without key

 

Motor Cooling Time Constants When the 469 detects that the motor is running at a load lower then overload pickup setpoint, or the motor is stopped, it will start reducing the stored TCU value, simulating actual motor cool down process. TCU decays exponentially at a rate dictated by Cooling Time Constants setpoints. Normally the cooling down process of the stopped motor is much slower than that of a running motor, thus running and stopped cooling time constants setpoints are provided in the relay to reflect the difference. The TCU lower limit of the running cool down curve is defined by Hot/Cold Safe Stall Ratio and level of the motor load. The TCU lower limit of the stopped cool down curve is 0% and corresponds to motor at ambient temperature.

 

 

 

Start Inhibit and Emergency Restart The Start Inhibit function prevents starting of a motor when insufficient thermal capacity is available or motor start supervision function dictate the start inhibit. In case of emergency the thermal capacity used and motor start supervision timers can be reset to allow the hot motor starting.