304N Raw Material Stainless Steel Screen Printing Mesh 200 Mesh-40W Silver Color
304N Import Raw Material High Quality 200Mesh-40W Silver Printing Mesh
Description of stainless steel wire mesh:
Stainless steel printing mesh is a special wire cloth used in the printing industry.
Features: The mesh is required to be square, and the angle between the two adjacent lines is 90 degrees, and the permeability is high. The mesh surface shall not have a joint wire knot, the mesh is uniform, the friction strength is high, the tensile recovery rate is small, acid and alkali resistance, and the strength is not changed due to the influence of ultraviolet rays. Stainless steel printing nets are also commonly referred to as ultra-thin silk cloth.
| material | SUS304N,304HP,316,316L,304L |
| weave type | plain weave |
| size per roll | usually 30 or 50 meter per roll |
| wire diameter | 0.018-0.02mm |
| aperture size | 41-268micron |
| hole shape | square hole |
Features of stainless steel wire mesh:
- High tension.Much higher than common polyester mesh,and this property is very stable
- Super Precision.Uniform wire diameter and aperture with extremely low difference
- Low Elongation.Very small elongation of wire mesh at high tension
- High Flexbility.The wire mesh will not lose elasticity at extreme tension
- High Corrosion Resistance.the excellent corrosion resistance of stainless steel wire exceeds polyester fiber
- Non-electrostatic.To avoid affects of nonelectrostatic for printing and ensure the safety of printing
- Good Heat-melting Resistance.Special features of steel wire mesh.Suitable for heat-melting ink
- Good Solvent Resistance.To avoid the affects of any solvents to wire mesh and to ensure the safety of printing
Application of stainless steel wire mesh:
Stainless steel screen printing is suitable for direct platemaking, surface is surface substrate, such as: glass, ceramics, metal, plastic, rubber, printing circuit, etc.Especially suitable for use in harsh environments, multicolor overprinter, mass printing, step printing, precision printing.Due to the small size of wire mesh, high mesh can be woven, and the strength and elastic modulus of large, good plane stability.However, the wire mesh is rigid, easy to generate indentation when impacted, poor resilience is not suitable for restoration, and it is not suitable for printing substrate with poor flatness.
Specification of stainless steel wire mesh:
| Mesh/inch | Wire diameter (inch) | Aperture (inch) | Open area | Weight (Sqaure meter) |
| 1*1 | 0.080 | 0.920 | 92.0 | 2.0 |
| 2*2 | 0.063 | 0.437 | 87.4 | 2.5 |
| 3*3 | 0.054 | 0.279 | 83.8 | 2.7 |
| 4*4 | 0.047 | 0.203 | 81.2 | 2.7 |
| 5*5 | 0.041 | 0.159 | 79.5 | 2.6 |
| 10*10 | 0.024 | 0.076 | 74.9 | 1.8 |
| 12*12 | 0.020 | 0.064 | 75.9 | 1.5 |
| 14*14 | 0.020 | 0.052 | 71.9 | 1.75 |
| 16*16 | 0.018 | 0.045 | 71.2 | 1.6 |
| 18*18 | 0.016 | 0.0398 | 69.4 | 1.4 |
| 20*20 | 0.009 | 0.041 | 76.0 | 0.57 |
| 30*30 | 0.012 | 0.0382 | 63.9 | 1.35 |
| 40*40 | 0.0098 | 0.015 | 72.1 | 1.25 |
| 50*50 | 0.0079 | 0.0121 | 36.7 | 1.0 |
| 60*60 | 0.0047 | 0.012 | 38.7 | 0.42 |
| 80*80 | 0.0047 | 0.0107 | 45.5 | 0.58 |
| 100*100 | 0.0039 | 0.006 | 59.8 | 0.50 |
| 120*120 | 0.0027 | 0.0056 | 67.7 | 0.29 |
| 150*150 | 0.0024 | 0.0043 | 41.6 | 0.27 |
| 165*165 | 0.0018 | 0.0043 | 50 | 0.167 |
| 180*180 | 0.0019 | 0.0036 | 64.5 | 0.22 |
| 200*200 | 0.0019 | 0.003 | 60.6 | 0.24 |
| 250*250 | 0.0012 | 0.0028 | 49.8 | 0.11 |
| 270*270 | 0.0014 | 0.0023 | 60 | 0.16 |
| 300*300 | 0.0012 | 0.0022 | 57 | 0.13 |
| 325*325 | 0.0014 | 0.0017 | 55.3 | .0.20 |
| 400*400 | 0.0012 | 0.0013 | 52.7 | 0.18 |
| 500*500 | 0.0009 | 0.001 | 50.7 | 0.15 |
| 635*635 | 0.0007 | 0.0008 | 55.0 | 0.10 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.