10P 380V 50HZ Meeting Alibaba best inverter heat pump , house heat pumps , air / water heat pump
Technology Specification
Air source heat pump feature
» Indoor unit mainly includes condenser, 4-way valve and expansion valve.
- Avoid the condenser to be burst in the cold weather, better anti-freezing proctection
- High efficient, lower heat dissipate
» Outdoor unit comprises evaporator, fan and compressor.
- Thermostatic heating element for evaporator anti-frosting protection
- The water connections and the drain pipelines must be protected against frost on site
- compressor outside ,to reduce noise mostly inside the house.
» Auxiliary electronic heater or solar coiler is on your option
» Fashionable design, compact structure, saving the place.
»Quiet, lower the noise when the unit is running
»Advance control panel. Timer function , automatic defrosting function, optional electrical heating, error messages showed for warning.
»It can be work in -25°C low ambient temperature.
Hot water output temperature up to 60°C, for domestic hot water or heating.
auto-defrosting function included. And cooling is optional
Air source heat pump working principle
| According to the principle of reverse Carnot cycle, the low-temperature and low-pressure liquid refrigerant exchanges heat with the surrounding air in the evaporator, absorbs the heat Q1 in the air and evaporates into a low-temperature and low-pressure gas state, the temperature of the refrigerant does not change during evaporation, and the low-temperature and low-pressure gas refrigerant After entering the compressor, the compressor is used to do work W. It is compressed into high-temperature and high-pressure gas. Then it enters the condenser. In the condenser, it exchanges heat with indoor water. Part of the heat Q2 of the high-temperature and high-pressure gaseous refrigerant is absorbed by the water. As the temperature rises, the refrigerant radiates heat and condenses and turns into a high-temperature, high-pressure liquid. During the condensation, the temperature of the refrigerant is constant and then enters the expansion valve for throttling. Throttling is a process of rapid cooling, and the refrigerant turns into a low-temperature and low-pressure liquid. This process is just like Contrary to the situation in the compressor, the refrigerant after throttling enters into the evaporator for heat exchange, thereby realizing the entire process of reverse Carnot. This cycle is continuous, and the air source heat pump can work continuously and keep the water temperature constant. Increased
So Q2=Q1+W in this process |
A. Payment service
1. T/T
2. L/C (for container order only)
B. Technical service
1. We calculate the capacity and recommend the best models.
2.We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3. We supply the spare parts and technical support in and after the warranty time.
4. We supply the training course to your workers at our factory if you need.
5. We can offer site training to your workers in your place which is negotiable.
C. After-sales service
1. Technical support for your installation, operation and maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the longer warranty period.
3. Spare parts and technical support at most economic prices after the warranty.
FAQ
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-10days, mass production time depend on the products'quantity.
Q3.Do you offer guarantee for the products?
A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).
Certificsate we have got :
- ISO 9001, ISO 14000
- Our company has been inspected and certificate by EMC
- CE And EN14511, EN 14825-ERP for heat pump exported to europe
- Energy label for all heat pump models sold to oversea market
- Testing laboratory calibrated by CNAS
Porduct Details
| Rated heating capacity | KW | 36 | |
| Rated Cooling capacity | 24 | ||
| Hot water supply | L/h | 800 | |
| Average heating input power | KW | 9.2 | |
| Rated heating input current | A | 18 | |
| Max outlet water temp | ℃ | 60 | |
| COP | 4.2 | ||
| Power | V/Hz | 380V/50 | |
| Noise | Db(a) | 60 | |
| Dimension | W*D*H | mm | 1450×760×1060 |
| Packing size | W*D*H | mm | 1520*800*1230 |
| Unit weight | KG | 289 | |
| Refrigerant | R417A/R407C/R404A | ||
| Working air temp range | (-20℃)—45℃ | ||
| compressor | Type | Copeland | |
| Air source heat exchanger | Type | Finned heat exchange | |
| Fan Type | axial flow fan | ||
| Hot water side heat exchange | Type | Coil heat exchanger | |
| Water flow | L/H | 10000L/h | |
| Water pressure down | Kpa | 54 | |
| Pipe size | DN | 32 | |
| Max flat spuare meter | M2 | 300 | |
Air source hat pump working principle diagarm
10HP Air source heat pump size
Main part diagarm
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.