50ton 80ton New Fully Continuous Waste Tire Pyrolysis Plant Production Line for Making Fuel Oil
50ton 80ton New Fully Continuous Waste Tire Pyrolysis Plant Production Line For Making Fuel Oil
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons, Continuous Waste Tyre Pyrolysis Plant with 50ton, 80 ton.
Description of Continuous Waste Plastic Pyrolysis Plant:
1.Large daily capacity of 20-50 tons per day and can work 24 hours without any stop for 15-20 days.
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Usage of the end products:
Crude carbon black ----make briquettes for heating use;make bricks to pave street
Pyrolysis fuel oil------ sell directly for heating oil; to refine into diesel grade oil.
Sync gas ------recycle to heat machine during production.
Technical Specification
| NO. | ITEM | Technical Parameter |
| 1 | Suitable Raw Materials | Small pieces of Waste tyre,rubber,waste plastic<=10cm |
| 2 | Operating Mode | Fully Continuous Opreation |
| 3 | Structure | Horizontal Type |
| 4 | Loading and discharging | Fully automatic feeding and discharging under high temperature at same time |
| 5 | Capacity(24h) | 20ton, 30ton, 50ton, 80ton, 100ton |
| 6 | Work Pressure | Slightly Negative Pressure |
| 7 | Oil Yield of tyres | 40%-45% |
| 8 | Reactor Rotation Speed | 1R/M |
| 9 | Power | 50-60kw/h |
| 10 | Cooling Method | Cycle water |
| 11 | Type of Drive | Sprocket Wheel |
| 12 | Heating Method | Coal, tyre oil, gas |
| 13 | NoisedB(A) | <=85 |
| 14 | Main Reactor Weight(Mt) | 15-18Mt |
| 15 | Total Weight(Mt) | 30—40Mt |
| 16 | Installation Space Required | 60m*30m |
| 17 | Manpower | 2persons/shift |
| 18 | Shipment | 1*40FR+3~4 HC |
| 19 | Delivery time | <=70Days |
Q: What's environmental pollution problems during the conversion process?
A:The environmental problem includes waste water, waste gas and waste solid.
Q:How to assure the reactor safety?
A: Our reactor is made by automatic welder machine. Welding technology and latest X- ray testing and flaw detection to protect gas from leak.
Q:How to solve the environmental problem when operating the reactor?
A:1.We have the closed discharging system and it is compete closed no fly ash and no pollution.
2.The water seal is also a gas purifier, when waste gas go through the water seal, some pyro-gas will be cooled down and the combustible gas will be sent into the heating system as fuel.
3.The whole process is no solid waste.
4.The emission control system can deal with waste flue gas with no pollution to environment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.