TONGJIN Iron Core Servo Press Machine 4 Column Type
Secure the iron core in the appropriate fixture Activate the TONGJIN servo press to exert pressure on the motor shaft
1. Descriptions
-
Preparation: Ensure a clean and organized workspace and gather the necessary tools and equipment, including the motor shaft, iron core, TONGJIN servo press, suitable fixtures, etc.
-
Positioning the iron core: Secure the iron core in the appropriate fixture, ensuring it is aligned correctly and held firmly during the pressing operation.
-
Preparing the servo press: Set up the TONGJIN servo press according to its specifications, adjusting the pressure, speed, and any other relevant parameters to match the pressing requirements.
-
Lubrication (if needed): Apply a suitable lubricant to the motor shaft and/or the inner surface of the iron core, if necessary, to facilitate smooth insertion and minimize friction during the pressing process.
-
Placing the motor shaft: Carefully position the motor shaft at the entry point of the iron core, ensuring proper alignment and orientation.
-
Pressing operation: Activate the TONGJIN servo press to exert pressure on the motor shaft, gradually pushing it into the iron core. Follow the press's operating instructions and monitor the pressing process closely.
-
Verification: Once the pressing operation is complete, verify the integrity of the assembly by conducting checks such as verifying the depth of insertion, measuring any required dimensions, and ensuring the shaft is securely seated within the iron core.
-
Completion and cleanup: Remove the assembled motor shaft and iron core from the fixture. Clean the workspace and perform any necessary maintenance or post-assembly tasks.
It's essential to note that the specific process may vary depending on the specific TONGJIN servo press model, motor shaft design, and iron core specifications. Always refer to the manufacturer's instructions and guidelines for your specific equipment and follow proper safety protocols throughout the process to ensure safe and accurate assembly.
2. Parameters Table
| Items/Type | Unit |
TJ-SP -01 |
TJ-SP -05 |
TJ-SP -10 |
TJ-SP -20 |
TJ-SP -30 |
TJ-SP -50 |
|
|
|
Maximum value | KN | 1 | 5 | 10 | 20 | 30 | 50 |
|
Allowance range |
KN | 0.1-1 | 0.5-5 | 1-10 | 2-20 | 3-30 | 5-50 | |
|
Minimum adjustable unit |
N |
1 |
||||||
|
Minimum detection value |
0.2% of the maximum pressure |
|||||||
|
Lead |
Maximun value |
mm | 200 | 200 | 200 | 200 | 250 | 350 |
|
Minimum adjustable unit |
mm |
0.01 |
||||||
|
Speed |
Press mounting |
mm/s | 0-35 | |||||
|
Fast forward/ return |
mm/s |
0-100 |
||||||
|
Minimum adjustable unit |
mm/s |
0.01 |
||||||
|
Dwell time |
Maximum vaule |
S | 3000 | |||||
|
Minimum adjustable unit |
S |
0.1 |
||||||
| Repeatability | mm | ±0.01 mm | ||||||
| Power | kw | 0.4 | 0.75 | 1.5 | 2.2 | 3.5 | 5.5 | |
| Voltage | Tri-phase | V | 380/220 | |||||
| Items/Type | Unit |
TJ-SP -70 |
TJ-SP -100 |
TJ-SP -150 |
TJ-SP -200 |
TJ-SP -250 |
TJ-SP -300 |
||||
|
Pressure range
|
Maximum value | KN | 70 | 100 | 150 | 200 | 250 | 300 | |||
|
Allowance range |
KN | 7-70 | 10-100 | 15-150 | 20-200 | 25-250 | 30-300 | ||||
|
Minimum adjustable unit |
N |
1 |
|||||||||
|
Minimum detection value |
0.2% of the maximum pressure |
||||||||||
|
Lead |
Maximun value |
mm | 350 | 500 | 500 | 500 | 500 | 500 | |||
|
Minimum adjustable unit |
mm |
0.01 |
|||||||||
|
Speed |
Press mounting |
mm/s | 0-35 | 0-35 | 0-30 | 0-25 | 0-20 | 0-15 | |||
|
Fast forward/ return |
mm/s |
0-100 |
0-100 |
0-100 |
0-50 |
0-50 |
0-30 |
||||
|
Minimum adjustable unit |
mm/s |
0.01 |
|||||||||
|
Dwell time |
Maximum vaule |
S | 3000 | ||||||||
|
Minimum adjustable unit |
S |
0.1 |
|||||||||
| Repeatability | mm | ±0.01 mm | |||||||||
| Power | kw | 7.5 | 7.5 | 7.5 | 7.5 | 11 | 11 | ||||
| Voltage | Tri-phase | V | 380/220 | ||||||||
★Only for reference.The stroke is optional,specific parameters are subject to the agreement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.