220V Standrad Al profiles Servo Electric Cylinder

It is also called Servo Electric Cylinder,a kind of actuator that achieves linear reciprocating motion through screw.It transforms the rotation motion of the servo motor into linear motion.

Servo linear actuator can transform the optimal advantages of servo motors(precise rotational speed control, precise rotation number control and precise torque control) into accurate speed control, accurate position control and precise thrust control.

As a new energy-saving transmission product, electric cylinder undoubtedly has more advantages in energy using and pollution control.

STEP 1 :Accuracy & environmental condition

Check the basic conditions used in the application

STEP 2: Required space

Check the available space in the application and select the installation options: linear type,parallel type or bare cylinder.

STEP 3: MAX axial force required

Check the axial force to select the servo motor and gearbox(if necessary).

STEP 4: MAX speed

Check the required speed to select the screw lead.

STEP 5: Required stroke

Select the required stroke from a list of standard stroke.If the required stroke is not listed: define the length of the available stroke at a minimum of 10 mm.Note the value of the maximum possible travel of the selected model.

STEP 6: Lateral force

Determine the lateral force of the application.The new series of cylinders are allowed to bear some lateral force.Please communicate with us if  you need to bear the lateral force in your application.

STEP 7 :Motor mounting flange

Select the appropriate motor mounting flange, linear or parallel.

STEP 8: The push-rod load form

Selects the electric cylinder push-rod end for load connection.

We provide complete system including driver, motor and gearbox to match the electric cylinder!

1. Compact structure and small dimension.

2. High rigidity, low inertness and fast response.

3. High reliability and long operating life.

4. Energy saving&less noise.

5. Convenient assembly and use,simple maintenance.

★ Electric cylinder is refueled with lubricating grease GB7324-1994 general lithium base 3 lubricating grease when leaves factory.

★ After electric cylinder has run for 300 hours, refill the lubricating grease. Refueling frequency, per 2000hours one time as usual, it is determined on basis of the operating environment and day-to-day operational time.

★ Refueling method: open the filler hole on the shell of electric cylinder, turn the screw to find the filler hole on the screw nut and refuel lubricating grease.

★ Requirement for lubricating grease:GB7324-1994 general lithium base 3 lubricating grease.