China Universal AC Current Clamp , 0.5 % Accuracy Clamp On Amp Probe mA Output for sale

Universal AC Current Clamp , 0.5 % Accuracy Clamp On Amp Probe mA Output

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: Within 7 Days

Brand: GFUVE

Product Description

Universal Inductive Current Clamp Sale 0.5 % Accuracy with mA Output

The GFUVE Universal Inductive Current Clamp with a year warranty, Q40-4 Series is an excellent probe to be used in power and current measurement, DMMs, recorders.This allows measurement of the current in a conductor without the need to make physical contact with it.

Features

Measurement range of 1mA to 600A AC

Large jaw opening designed

Improved ergonomic design and easy operation

High content nickel metal core

Conforms to EN 61010, 600V CAT III

Low phase shift for power measurement

Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

UL, CE mark

Applications

Power quality measuring

Large industrial loads

Measuring around cable bundles

Power load monitoring

Waveform analysis

Energy meter calibrator

Parameter

Electrical parameters
Ratio	1000: 1 or 2000:1 (customized)
Accuracy class	0.1%, 0.2%, 0.5%
Primary current	0 - 500A AC
Secondary current	0 - 1A AC or 0-5V AC (customized)
Max. Cont. Input current	600A
Over voltage category	CAT III 600V
Output signal (AC current)	250mA,500mA,1A,5A AC at nominal input current
Output signal (AC voltage)	250mV, 500mV, 1V, 5V AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	Clamp type
Output mode	Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm)	82 x 290 x 25.3
Weight (g)	500
Holding wire diameter (mm)	φ40
Max. jaw opening (mm)	40
Color	Black
Material	PC+ABS+Polycarbonate, UL94 V0

FAQ, following questions will help you to select the matched probe for your applications.

1. Please determine if you are measuring AC or DC?

GFUVE Q40-4 used for AC measurement.

2. What is the maximum current you will measure?

Q40-4 has 600A as max.

3. What size conductor will you clamp onto? This parameter determines the probe jaw size needed.

Q40-4 conductor φ40mm

4. What type of probe output do you need or can you work with (mA, mV, A, AC, etc.)?

Q40-4 can customize output with Amp, Volt.

5. What is the working voltage of the conductor to be measured?

GFUVE probes should be used below 600 volts

6. What type of termination do you need: jacks, leads or BNC?

Q40-4 standard has 2.5meter leads. We can offer jacks or BNC… as options.

7. If you cannot find information you need or would like assistance, contact us today. We have designed many more probes than those shown in this catalog, and we manufacture in Beijing, China.