Three Phase Accuracy 0.2 Clamp On Amp Probe Current Monitoring 2.5m Lead Output Cable

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: Within 7 Days

Brand: GFUVE

Product Description

Inductive Current Clamp Current Monitoring for Three Phase Accuracy 0.2

The model Q8A2 permalloy core current clamp with high accuracy up to 0.1% has been designed for use with multimeters, recorders, power analysers, safety testers etc.

Features

1. Suitable for 5A, 10A cable online measurement

2. Holding wire diameter: φ8mm

3. Dimension: 45mm×158mm×25mm

4. Load capacity: ≤4Ω

5. Installation: clamp type

6. Output mode: lead output

Parameter

Electrical parameters
Ratio	1000: 1 or 2000:1 (customized)
Accuracy	0.1 %,0.2%
Primary current	0 - 10A AC
Secondary current	0 - 10mA AC or 0 - 100mV AC (customized)
Max. Cont. Input current	12A
Over voltage category	CAT III 600V
Output signal (AC current)	From 0 to 10mA AC at nominal input current
Electrical parameters - continued
Output signal (AC voltage)	From 0 to 100mV AC at nominal input current
Frequency range	40Hz-2000Hz
Dielectric strength	3KV 50Hz/60Hz at 1 minute
Temperature range	-20°C to +55°C
Output	2.5 meter cable with D01 connector
Max. voltage not insulated conductors	600 V
Standard	EN 61010-1, EN 61010-2-032, IEC60044-1
Installation	Clamp type
Output mode	Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm)	45x158x25
Weight (g)	250
Holding wire diameter (mm)	φ8
Max. jaw opening (mm)	8
Color	Black
Material	PC+ABS+Polycarbonate, UL94 V0