100 A Measurement Electrical Flexible Ct Clamps For Bnc Connector Red Color
XQ20 100A Measurement Electrical Inductive Current Transformer Clamp for BNC Connector
The model XQ20 Current Transformer Clamp is suitable for 100A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
XQ20 current transformer clamp is high precision 0.1%, it can measure current harmonics. clamp cable is easy, quickly. many intrusments select this model XQ20.
Applications
Power monitor meter
Energy meter calibrator
Resistance tester
Phase Angle meter
Power quality Analyzer
Features
1. Suitable for 100A cable online measurement.
2. Holding wire diameter: φ20mm
3. Dimension: 52.5mm×137.5mm×28mm
4. Load capacity: ≤4Ω
5. Installation: clamp type
6. Output mode: lead output
PARAMETERS
| Electrical parameters | |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2% |
| Primary current | 0 - 100A AC |
| Secondary current | 0 - 100mA AC |
| Max. Cont. Input current | 120A |
| Load capacity | ≤4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 200mA AC at nominal input current |
| Electrical parameters - continued | |
| Output signal (AC voltage) | From 0 to 2V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 52.5 x 137.5 x 28 |
| Weight (g) | 400 |
| Holding wire diameter (mm) | φ20 |
| Max. jaw opening (mm) | 20 |
| Jaw color | Red, yellow, blue, green, black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Photo
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.