2000A / 5A 0.5s IEC60044-1 IP67 Ring Core Current Transformer Outdoor
LMCK185-10 2000A /5A 0.5s IEC60044-1 IP67 Outdoor split core current transformer manufacturers
Outdoor current transformers are applicable for AC power system 35kV and measurement of current of power supply equipment below 10KV also can be used for microcomputer protection. This Type is flame retardance anti-moisture, stable performance, no maintenance.
GFUVE Electronics is a professional manufacturer in China devoted in research ,design ,and production of Split Core Current Transformers(SCT) , Rogowski Coils,Split Core (Clip on ) Current Sensor ,Split Core Current Transducer ,High precision current transformer ,and mini voltage transformer .Measure AC current from 1A to 5000A, Output can be 333mV ,mA ,1A and 5A .UL,CE approved.
LMCK series outdoor current transformers are applicable for AC power system 35kV and measurement of current of power supply equipment below 10KV also can be used for microcomputer protection. This type of current transformer employs imported silicon steel which with high permeability as magnetic material, has the characteristics of Small magnetic circuit loss and can be split, its semicircular core and secondary windings employ high quality epoxy resin vacuum, casting in plastic-case (ABS&PC) which is flame retardance anti-moisture, stable performance, no maintenance.
Split Core ( Clip-On ) Current Transformer Split Core (Clip-On) Outdoor Current Transformer Clamp-On Weather Proof Rogowski Coil Primary Clip-On Current Transformer Rogowski Coils for Smart Meters Rogowski Coils Three Phase Current Transformer (Motor & Inverter Control) High Precision Current Transformer Zero Phase Current Transformer Ground Fault Current Transformer Three Phase Current Transformer.
Parameters
| Technical parameters | |
| Standards | IEC60044-1; IEC 61869-2; NTC 2205; GB1208-2006 |
| Accuracy Class | 0.5%, 1% |
| Range of primary rated current | 300-5000A |
| Range of Rated load | ≤25VA |
| Technical parameters - continued | |
| Rated frequency | 50/60Hz |
| Rated secondary current | 5A or 1A |
| Secondary winding power frequency withstand voltage | 3kV, 1min |
| Safety Factor Rating | (FS) <5 |
| Flame retardant ABS plastic shell inside, jaw waterproof apron. | |
| Mechanical parameters | |
| Aperture (mm) | Φ185 |
| Dimensions (W×D×H) (mm) | 350×283×55 |
| Weight (kg) | 4.5 |
| Working conditions | |
| Operating temperature | -35°C to +55°C, not exceeding +40°C |
| Environment | outdoors or indoors |
| The height of above sea level | 0- 3000m |
| Conditions | No existence of severely begrimed, erosive and radioactive gas in the air. Continuous working under the rated current is allowed. |
Compare Datasheet
| Model | Primary rated current | Rated load | Aperture (mm) | Description (mm) |
Weight (kg) | Material | Water-proof |
| LZCK-55 | 100-1500A | ≤10VA | φ55 | 180×138×52 | 2 | PC | IP65 |
| LMCK185-10 | 300-5000A | ≤25VA | φ185 | 350×283×55 | 4.5 | PC | IP65 |
| LZCK310-10 | 300-600A | ≤10VA | φ50 | φ50 x φ110 x 32 | 1 | Resin | silicon case (option) |
| LZCK322-10 | 30-600A | ≤10VA | φ50 | φ50 x φ110 x 52 | 1.6 | Resin | silicon case (option) |
| LZCK350-10 | 20-600A | ≤25VA | φ50 | φ50 x φ110 x 105 | 3.1 | Resin | silicon case (option) |
| LZCG530-10 | 30-600A | ≤20VA | φ45 | φ45 x φ120 x 65 | 2.1 | Resin | silicon case (option) |
The Product Picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.