Standard Fiber Bragg Grating Bragg wavelength 1510 nm 1310nm Constant reflectivity larger than 80% single mode fiber
Standard Fiber Bragg Grating Bragg wavelength 1510 nm 1310nm Constant reflectivity larger than 80% single mode fiber
Hicorpwell seamless steel tube FBG temperature sensor is packaged with fiber optic connectors,
stainless steel seamless tubes and single-point/string fiber Bragg grating (FBG).
| Sensor armor type | Hicorpwell Standard Fiber Bragg Grating Bragg wavelength of 1310nm |
| Sensor armor diameter | 0.9mm |
| Seamless steel tube material for sensors | 304 stainless steel |
| Seamless steel pipe wall thickness for sensors | 0.18mm |
| Seamless steel tube weight for sensors | About 3.2 g/m(Without connector) |
| Sensor tensile strength | >200N(Without connector) |
| Sensor anti-side pressure | >9000N(Without connector) |
| Sensor compressive strength | >180Mp(Without connector) |
| Sensor tail package | Adhesive seal |
| ※Armored and rear end options | Sensor diameter (0.9 mm / 2.0 mm / 3.0 mm), unconventional corrosion-resistant solution |
| Multi-point fiber grating string (array) |
| Fiber type | SMF-28E |
| Writing method | Mask |
| Center wavelength | 1525nm to 1565nm or According to customer needs |
| Reflectivity | 10% to 99% |
| Temperature range | -40 to 150 degrees Celsius (this product can be used repeatedly at 150 degrees, but it can not be placed at this temperature for a long time. It can be used continuously for a long time in default temperature) |
It has high sensitivity, fast heat transfer, good accuracy, small volume, lightweight, high tensile strength,
high-pressure resistance, high-temperature resistance, waterproof and moisture-proof, no combustibles,
corrosion resistance, etc.
Using the temperature measurement characteristics of the Bragg grating (FBG), the sensor can be probed,
stuck, surfaced, glued or embedded in the structure to be tested for temperature detection and monitoring.
It can be widely used in industrial production, power, railway, military, aerospace and other fields of single-point
or quasi-distributed temperature measurement.
| Connector type | FC,ST,SC,LC | |
| End face type | APC | PC |
| Ferrule material | ceramics | |
| Insertion loss | <0.2db | <0.2db |
| Return loss | >-60db | >-40db |
| Storage environment | -40℃to+85℃ | |
| working environment | -40℃to+75℃ | |
| ※Sensor connector options | FC/APC, FC/PC optional high-temperature joints, high-temperature joint materials can withstand 550 degrees high temperature (depending on stock) | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.