Stainless Steel HEPA ULPA Filter Static Dynamic Pass Box for Laboratory Pharmacy Plant

Product Description

Dynamic Pass Box is used in pharmaceutical classified area and designed to minimize traffic and cross contamination between two areas and at the same time transfer parts,tools, products etc. The unit acts as an air lock device preventing ambient air from entering, or clean air from exiting the clean room. It also help to prevent particulate contaminants from entering into a clean room & between different classified areas.

Features

1. Laminar flow design is adopted, and the air flow direction is upper inlet and lower exhaust.
2. Wind speed: After passing through the high-efficiency filter, the wind speed is controlled at 0.45-0.60m/s
3. Pressure difference function: display filter pressure difference (range efficiency 0-500Pa), accuracy ±5Pa.
4. The HEPA filter can be disassembled and assembled separately from the upper box,which is convenient for maintenance and replacement.
5. Noise: Less than 65dB during normal operation.
6. Custommade available upon customer's requirement.

Technical Data Sheet

Material: Powder Coated Steel / SUS304
HEPA Filter Efficiency: 99.995%@0.3um
Voltage: 220V/110V or Customized
Surface Treatment: Stainless Steel
HEPA Filter: H14
Noise: 40-60db
Specification: 880*780*1300mm
Inside Diameter: 700*700*700mm

Parameters Table