High Temp Epoxy Resin Worktop / DrainTop
2018-3-7
Lab Grey Color Epoxy Resin Classic DrainTop,Epoxy Resin Product Manufacturer
1. Product Description:
DrainTop worksurfaces gently slope from the containment rim to the sink area for improved drainage.
Drain board sections are curved raised ribs that facilitate glassware drying and improved cleanups.
The sink area accommodates single or double Dropln Sinks.
Flexibly designed,DrsinTop can be used at the end of islands and peninsulas or in wall runs as 51",57",63" or 69"(1295,1448,1600,or 1753 mm) sections.
Size: Customizable
Color: Grey,Black,White
Thickness: 16,19,25 mm
Surface: Matt,Polishing
Mini order : 50 Square meters
Delivery time: 15-30 days after receipt of deposit.
2. Common specification sheet (Unit : mm)
| Long | Wide | Thickness |
| 1200 | 700(750) | 16/19/25 |
| 1500 | 700(750) | 16/19/25 |
| 1800 | 700(750) | 16/19/25 |
| 2400 | 700(750) | 16/19/25 |
3. Properties of Epoxy Resin Worktop
A). Pollution resistance
Surface is smooth, no stoma, not to hide the dirt, effectively restrain bacterial growth, such as the SARS virus, etc.,especially suitable for the medicine and biological laboratories.
B)And laboratory common high temperature 600 degrees, not foaming, not broken, especially suitable for a long time to place the combustion furnace ventilation cabinet.
C). Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb moisture in the air, the installation will not warp deformation, especially suitable for the operation of splash zone.
D). Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive, do not produce poisonous gas when heated, will not violate the safety and health of operator.
E). Durable
One core, not to take off layer, not inflation, not cracked,surface scratches can be repaired after renovation
F). 24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
G). High performance to price ratio
Unique 19mm thickness, the market is the highest price of the laboratory table system.
H). Beautiful appearance
Smooth surface (MATT finish) , light reflection, easy to clean, easy maintenance.
I). Uniform color
Ensure the color of different batches of products is permanent, can be used for multi color selection.
4. Minimum acceptable results
Minimum acceptable test results shall be equal to or better than the following reagent rating:
| Alkaline Solutions-Corrosive | |
| Ammonium Hydroxide 10% | 1 |
| Sodium Carbonate Sol 20% | 1 |
| Sodium Hydroxide 60% | 1 |
| Sodium Hypochlorite Sol 4% | 1 |
| Potassium Hydroxide 15% | 1 |
| Organic Solvents | |
| Acetone | 2 |
| Benzen | 2 |
| Carbon Tetrachloride | 2 |
| Dimethyl Ether | 1 |
| Dimethyl Formamide | 1 |
| Ethyl Acetate | 1 |
| Ethyl Alcohol 95% | 1 |
| Ethylene Dichloride | 1 |
| Heptane | 1 |
| Isooctane | 1 |
| Kerosene | 1 |
| Methyl Alcohol | 1 |
| Toluene | 1 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.