Rubber Based PSA Hot Melt Adhesive with 2000±500 mpa*s Viscosity and ≥30N/2.5cm Peel Strength for Sanitary Products
Rubber-based pressure sensitive adhesive hot melt with high bonding strength, supplied in 16-ton container quantities. This construction adhesive is primarily designed for structural applications in sanitary products including diapers and sanitary napkins.
| Parameter | Specification | Test Method |
|---|---|---|
| Material | Synthetic polymer resin | - |
| Appearance | Light transparent block | - |
| Soften Point | 80±5°C | GB/T15332-1994 |
| Viscosity (180°C) | 2000±500 mpa*s | HG/T3660-1999 |
| Peeling Strength (180°) | ≥30N/2.5cm | GB/T2790-1995 |
| Valid Time | 12 months | Indoor, unexposed to sunlight, ≤40°C |
Can be applied by slot or roll coating applicators. Recommended operating temperature range: 150-180°C, depending on equipment, substrates, and plant conditions.
Complies with FDA Indirect Food Contact Regulation 21 CFR 175.105 "Adhesives".
Available in 6.25kg or 1kg blocks wrapped with siliconized release paper, 25kg per box. Contact sales representative for custom packaging requirements.
Store in original packaging for up to 12 months from manufacture date. Maintain dry, clean conditions at ambient temperature between 5-35°C. Protect from direct sunlight and moisture condensation.
Do not mix with other adhesives to prevent contamination. Material is applied hot. Handle with appropriate safety measures.
Hot Melt Pressure Sensitive Adhesives remain tacky at room temperature and are widely used in labeling, tape manufacturing, diaper production, feminine hygiene products, and bottling industries.
- Own manufacturing facility with imported raw materials
- Dedicated laboratory and R&D team for customized product development
- OEM/ODM services available
- Free samples provided
- Agent support program
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.