Zinc Oxide Hot Melt Adhesive for Medical Plasters - 109±5℃ Softening Point, 27,000±1,000 cps Viscosity

• Medical tapes, plasters, and bandages for various substrates
• Wound dressing applications
• Other pressure sensitive adhesive applications requiring high bond strength, tack, and shear resistance

This material can be applied using slot or roll coating applicators. Recommended operating temperature range is 150-180℃, depending on equipment, substrates, and facility conditions.

This product complies with FDA Indirect Food Contact Regulation 21 CFR 175.105 for adhesives.

• 6.25kg blocks wrapped with siliconized release paper
• 1.045kg blocks wrapped with siliconized release paper
• 25kg per box
• Custom packaging available upon consultation

Properly sealed packaging can be stored indoors for 24 months from manufacturing date. Store in original packaging under dry, clean conditions at ambient temperatures between 5℃ and 35℃. Protect from direct sunlight and moisture condensation.

• Do not mix with other adhesives to prevent contamination
• Material is applied hot - use appropriate personal protective equipment
• Wear protective clothing and eye protection to prevent burns
• Ensure adequate ventilation to remove vapors or fumes
• Rotate stock and use oldest inventory first