Kraft Paper Tape Tissue Tape Foam Tape Aluminum Foil Tape Manufacturing Rubber Base Hot Melt Adhesive Glue

Product description:

This product is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for label & tape applications where good permanent adhesion is required.

The product is featured high tack and peel, good wetting to substrates, oil resistant and good die-cuttability.

Technical specification:

Operating Guides:

The material can be applied by slot or roll coating applicators.

Suggested operation temperature is 150 – 180℃ for both, depending on machines, substrates, and plant conditions.

FDA Status:

The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

Package:

6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box or 180kg fibre drum. Please consult the sales representative for special requirements.

Storage & Shelf life:

The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35 ℃ and above 5 ℃.

Direct sunlight and moisture condensation must be prevented.

Operating & Precaution:

Do not mix with other adhesives to prevent contamination.

The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns.

Adequate ventilation is suggested to remove any vapors or fumes generated.

Rotate stocks and using the oldest stock first.