Over Center Locking Hand Control Lever 1000lb Load Capacity with 2-7/16" Travel for Industrial Equipment
Our over center locking hand control lever delivers superior performance, quality, and service life for industrial applications. The lever features two distinct positions (over-center and off) approximately 90° apart, eliminating the need for ratcheting or secondary unlocking operations.
- Maximum Load Capacity: 1000 lb
- Maximum Travel: 2-7/16 inches
- Heat-treated 4130 load link for enhanced durability
- Integral adjustment knob for cable tension and travel settings
- Corrosion-resistant epoxy or electrostatic paint finish
- Side and flange mounting configurations available
- Non-corrosive bushings and coated carbon steel construction
- All necessary attachment hardware included
- Optional tamper-resistant knob for security
- Optional weather-resistant switch at off position
- Plastic adjustment knob for easy operation
- Mobile equipment
- Industrial machinery
- Construction vehicles
- Agricultural equipment
Dimension A (lever in full "OFF" position) is used for calculating cable length. Dimension B minimum (lever in full "ON" position with minimum CCW travel) is used during installation and initial adjustment. Turn knob clockwise to add travel and increase brake pressure setting.
2.5 inches (64mm) wide side plates with one cable and three alternate sets of cable clamp holes. Suitable for cowl, instrument panel, seat riser, or frame installation.
| Kit B815 Hardware Components |
|---|
| Clevis pin, Cotter pin, Washer, Mounting spacers (2), Cable clamp, Clamp base, Clamp spacers (2) |
2.5 inches (64mm) wide side plates with one cable. For cowl, instrument panel, seat riser, or frame installation without cable support.
| Kit B816 Hardware Components |
|---|
| Clevis pin, Cotter pin, Washer, Mounting spacers (2) |
2.5 inches (64mm) wide side plates with one cable. Designed for bulkhead, floor, or island (doghouse) installation with rigid frame for improved alignment.
| Kit B817 Hardware Components |
|---|
| Clevis pin, Cotter pin, Washer, Cable clamp, Clamp base, 5/16-24 Bolts (2), Nuts (2) |
1.5 inches (38mm) wide side plates with one cable. Compact design for cowl, instrument panel, seat riser, or frame installation.
| Kit B834 Hardware Components |
|---|
| Clevis pin, Cotter pin, Washer, Mounting spacers (2), Cable clamp |
2.5 inches (64mm) wide side plates with two cables. Note: Load on lever assembly equals sum of load in each cable.
| Kit B835 Hardware Components |
|---|
| Clevis pins (2), Cotter pins (2), Washers (2), Mounting spacers (2), Cable clamps |
1.5 inches (38mm) wide side plates with one cable. Compact flange mount design for various installations.
| Kit B837 Hardware Components |
|---|
| Clevis pin, Cotter pin, Washer, Mounting spacers (2), Cable clamp, Clamp spacers (2) |
1.5 inches (38mm) wide side plates with one cable. Compact design for space-constrained applications.
| Kit B837 Hardware Components |
|---|
| Clevis pin, Cotter pin, Washer, Mounting spacers (2), Cable clamp, Clamp spacers (2) |
2.5 inches (64mm) wide side plates with two cables. Wing flange mounting for bulkhead, floor, or island installation.
| Kit B835 Hardware Components |
|---|
| Clevis pins (2), Cotter pins (2), Washers (2), Mounting spacers (2), Cable clamps |
All line art dimensions are represented in inches. When considering load requirements for dual-cable models, the load on the lever assembly equals the sum of the load in each cable.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.