Stable Spectator Retractable Grandstands with Blow Molded Seat

Product Description

Burgeon retractable grandstands is stable in its design and quiet to operate. Every parts including our slant frame engineering geometry has been designed to enhance the system's operation strength and stability.  It provides various platform seating solution to position the space. It includes wall attached unit, integral dolly, freestanding unit, travelling unit etc. All retractable grandstands platform type can be customzied according to project site.

Quick Detail

Plarfrom Type

1) Travelling Unit

It is a hybrid of recessed and portable units. Travelling units use integral power to drive the entire bank from one setup position to another. Set-up time is greatly reduced compared to individual portable sections.

2) Portable Dolly

It is the most economical for large number of small portable sections. Two dollies are required to move one section.

3) Integral Dolly

Ideal for high tier units, the integral lifting mechanism allows you to move multiple portable sections without additional equipment. Four mechanical screw jacks lift the unit and 12 large wheels allow for effortless transportation of your bleacher.

4) Freestanding Unit

For some buildings, there are permanent large columns or week loading reat wall, the freestanding units is the ideal sulution.

Operation Way

1) Manual Operation

Operating Handles: Provide and install manual operating handles constructed of 19mm OD steel tubing. Handles to engage pull-bar installed at the first tier.

2) Power Operation

A. Integrated Power: Furnish and install an integral automatic electro-mechanical powered frame propulsion system, to open and close telescopic seating.

B. Motion Monitor: Provide flashing light with self-contained warning horn mounted to the telescopic seating for audio and visual warning during integral power operation. 

C. Electrical: Provide all wiring within seating bank including remote control device.

D. Electrical Switchboard and Enclosure: Seating Manufacturer shall provide a complete switchboard and enclosure with each seating bank.

Accessories:

1) Variable Row 1: Provide first row recoverable modular seating units to be utilized for both wheelchairs and able-bodied persons.

2) Portable Access Stair: Provide portable stair units with hand rails.

3) Cross Aisle: Provide continuous top cross aisle per plan of seating.

4) Carpeted Decks: Provide at decks and steps carpet as selected. Color to be of manufacturee's standard selection.

5) End Curtain: Furnish, deliver and install closure curtain panels at each exposed deck end in accordance with the drawing.

Application

School Sport halls

Gyms

Event Center

Entertainment Center

Sports halls

Multipurpose Center