Flexible Telescopic Modular Grandstands with Customized Seat Color 

Description

1) Seat Modules: 460mm minimum spacing, below-molded, high density polyethylene modules in mono tone colors provided with a scuff resistant textured.

2) Comfort Profile: The Seat and the back have been designed with anatomically contoured seat surface using blow molded construction that allows form-fit deflection for maximum spectator comfort.

3) Melody Chair metal brackets are bolted to the plywood decks at the centre's detailed on the drawing. Bolts with Nyloc Nuts and washers are to be used.

4) Number Plates: Seat module shall have recessed pockets to accept seat number plates.

Quick Detail:

Understructure Introduction

A.Frame System:

1) Wheels: Wheels with non-marking poly urethane face to protect wood and synthetic floor surfaces, with molded-in metal bush and bearing to fit a10mm diameter axles secured with C Clips.

2) Slant Columns: Tubular Shape Steel (RHS).

3) Deck Stabilizer: Steel components bolted to nose and riser at three locations per section. Interlocks with adjacent stabilizer on upper tier using low-friction nylon roller to prevent separation and misalignment.

4) Deck Support: Securely captures decking for entire length of section.

B.Deck System:

1) Section Lengths: Each bank shall contain sections not to exceed 5980mm in length with a minimum of two supporting frames per row, each section.

2) Rear Riser: Continuous roll formed steel members

3) Nosing: Continuous Tubular Steel Section (RHS)

4) Deck End Overhang: Not to exceed frame support by more than 1715mm.

​a

Features

1) starting with an economical nose mounting seat with a folding back and also can be installed with a folding mechanism and tip-up base

2) Integrated ergonomically designed for superior comfort

3) Its simplicity within its design allows for greater flexibility

4) Blow moulded construction for greater strength and confort