60cm 30cm Width Digital Transfer Film Pet Dtf Film Roll for Heat Transfer Printing

DTF Film Roll is also known as color inkjet film, digital printing film, etc. The water-based color ink and white ink are directly printed on the printing film by the printer to form various beautiful color patterns, sprinkled with hot melt adhesive powder, shaken, dried, and then transferred to the ironing board.

DTF (Direct to Film) film roll is an essential consumable in the DTF printing process, a modern and versatile textile printing technology. It serves as the carrier for the printed design before it is transferred onto various fabric substrates, playing a pivotal role in achieving high-quality and durable prints.

It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature.

The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year.

• We are environmentally friendly adhesive enterprises to ensure the environmental performance of raw materials
• Own factory, efficient technical equipment, a number of production lines
• Professional R & D team, set production, research and development, sales as one of the new enterprises
• Service thoughtful, short delivery cycle

• Tear-off method: cool tear or hot tear.
• The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other.
• Reasonably control the temperature and pressing time. If the temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticity

DTF Film Roll the design is printed onto the DTF film using a specialized printer and ink. After the printing is complete, the film is placed on the fabric with the design facing down. Heat and pressure are applied to transfer the ink from the film onto the fabric, resulting in a vibrant and durable print.

DTF film is designed to facilitate the transfer of the printed design onto fabric. After the design is printed on the film, a layer of DTF adhesive transfer powder is applied. When heated in a heat press, the adhesive melts, and the film, along with the printed design, is transferred onto the fabric. The film then peels off easily, leaving the design firmly attached to the fabric. This transfer process requires the film to have good release properties, ensuring a clean and complete transfer.

Package Details: 2 rolls per ctn (60cm), 4 rolls per ctn (33cm & 30cm)

It can ship by FedEX. It will need 5-7 days at usual. Also can by sea and air.